Caught, entangled in running powered equipment normal operation · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Comfort Systems USA (Syracuse), Inc., 6500 New Venture Gear Drive, EAST SYRACUSE, NEW YORK 13057
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was operating a pipe threading machine to remove a fitting from a pipe. The pipe wrench in the employee's left hand pinched his left middle finger, resulting in a partial amputation.
Amputation Other finger(s) n.e.c. Threading, tapping machinery
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 922160)
A smoke jumper parachuted out of a helicopter during a forest fire response, landed on steep rugged terrain, and suffered femur and rib fractures and a liver laceration. The employee was hospitalized.
Employees were troubleshooting dual duct detectors in a room. The injured employee was on the second rung from the top of a forward-facing 12-foot A-frame ladder. He was reinstalling the duct detector in the furthest duct from him (18 inches). When he pushed the duct detector into the existing holes, the duct broke free and fell, striking his back and shoulders. He was knocked forward over the ladder and fell to the floor. The employee sustained a head injury.
An employee was descending an 8-foot A-frame ladder when he tripped over the fourth step/rung and fell, contacting the floor and a sprinkler pipe that was set on the ground. The employee sustained fractures to his left arm.
An employee working as a contracted firefighter was using a bulldozer to push back an active fire line when they became entrapped in flames, resulting in first- and second-degree burns.
An employee was engaging in daily physical training in preparation for fire season as a smokejumper. The employee sustained swelling and stiffness in their arms and was hospitalized with rhabdomyolysis.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.