Morgan Advanced Materials

An employee was setting up for operations on a centerless plunge grinder. The machine's cutting wheel lacerated the top of the employee's right hand. The employee was hospitalized.

An employee was cutting carbon blanks on a band saw. His hand slipped and contacted the blade, which cut three-quarters of the way through his right middle finger, resulting in medical amputation.

While conducting a die change, an employee attempted to remove a clamp ring from around the die. The die ring assembly slipped and pinched the employee's left middle finger between the ring and the table of the press, resulting in a fingertip amputation.

An employee was operating an asphalt grinding machine when a branch got in the way of the machine. He crawled on top of the machine to cut the branch but it snapped back and knocked him off the equipment. He fell approximately 10-12 feet to the ground below, resulting in fractures to both wrists and forearms, and a left knee fracture.

A temporary employee was on a ladder while cutting conduit on a new building using a reciprocating saw. They sustained an electrical shock from a live electrical cable. The employee fell backward approximately 6 feet to the ground, resulting in hospitalization with a fractured heel that required surgery.

An employee was working on the ninth position of a 12-foot ladder, installing a new light fixture in an existing building. The employee sustained an electrical shock, lost his balance on the ladder, and fell. He sustained a fracture of the lower back and bruises on his hand and foot. The fracture required surgery.

At approximately 10:00 AM, employees were conducting asphalt loading operations. While securing a hose atop a truck, an employee encountered a malfunction involving a plugged hose. Pressure built up within the hose and suddenly released, causing the hose to fly off the truck. The hose contacted two employees and both employees fell approximately 7 feet. Employee 1 was on top of the truck and sustained three fractured ribs and a head contusion. Employee 1 was hospitalized. Employee 2 was climbing a ladder on the truck and sustained a fractured right leg. Employee 2 was not hospitalized.

An employee was working from a ladder, installing light fixtures. The employee was shocked and fell from the ladder to the floor about 6 feet below, striking their head and back. The employee was hospitalized with a laceration to the head and broken vertebrae.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.

An employee was removing a hose from a chemical tank after filling the tank with hexamethylenediamine (HMD). He checked the line to ensure that the hose was clear, then disconnected the hose at the connection. Residual chemical sprayed onto his face, causing a second-degree burn. He was hospitalized.

Two employees were moving a railcar (plastic pellet hopper car) using a mobile railcar mover. One employee was the engineer in control of the railcar mover and the injured employee was a switchman. The railcar mover went forward and the hopper railcar struck the injured employee, resulting in a severe crushing injury to the employee's right arm.

An employee was opening a filter housing in the potassium chloride production area and got sprayed with a hot solution of potassium chloride brine. The employee sustained thermal burns to their right hand and legs.

An employee was performing maintenance on a guillotine cutter machine. As the employee was placing a pin in the machine, his left middle fingertip was caught, resulting in a partial amputation to the finger. The machine was not locked out at the time.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.