J M MANUFACTURING COMPANY INC

An employee was running PVC production lines when a machine malfunctioned. As he tried to free a pipe that was jammed in a belling station, the machine started to process and its hydraulic cylinder came down on his right little finger. The finger was amputated.

The injured employee was assisting with removal of a rotary valve from the flanges of a silo. It was then placed on the floor of the silo for inspection. While Employee 2 was inspecting the rotary valve to ensure it was in good working condition, he noticed there was plastic material inside the rotary valve near the impeller (vane). The injured employee removed the pieces of plastic as Employee 2 turned the outside wheel with his foot. After all the plastic material was removed, Employee 2 moved the outside wheel a final time to ensure free movement of the part. At this time, the impeller (vane) came in contact with the injured employee's middle finger. The injured employee abruptly jerked his hand away resulting in a laceration to his fingertip and fingernail.

Two maintenance employees were trying to clear a clogged pipe using a small piece of metal. One of the employees was holding down the manual button on a solenoid so the gate would stay open. The employee holding the button let go of the button and the gate closed on the other employee's finger. He suffered a right middle fingertip amputation.

An employee was reaching over to straighten an 1800-pound super bag filled with regrind material when the bag gave in. The super bag fell striking the employee in the shoulder and knocking the employee down. The regrind material then covered the employee. The employee suffered a broken left hip.

An employee was using a reciprocating saw and holding the handle/trigger with his right hand. When the reciprocating saw started, it pulled his glove and left fifth finger into the quick lock blade clamp, lacerating and fracturing it. His finger was partially amputated.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Employees were hooking up a new reel of pipe to be processed into shorter lengths. This process involved routing a winch cable through a haul-off and attaching it to the pipe using a clamp. One employee held the winch cable while another pressed the feed-out button to loosen the cable. The cable tightened and pulled the hand of the employee holding it into a pulley. The employee's right index and middle fingertips were amputated at the first knuckle.

An employee was cutting pipe using a saw when she received an electrical shock from the power tool. The employee was hospitalized.

An employee was overseeing production on a winder machine and went to clear a jam when the head stock amputated their right thumb and index fingertip.

On 8/22/2025, an employee was working to clear a grinder jam. The employee was using a "no-touch tool" to rotate the drum of the grinder. He slipped forward and his right hand contacted a pinch point between the backside of the blade and the grinder housing. The employee's right middle fingertip was partially amputated with bone loss.

At about 1:25 a.m. on August 14, 2025, an employee was operating a 10-inch band saw at a molding machine. The employee was working to cut the sprue off a PVC fitting. The blade snagged on the sprue and pulled his left index finger into the blade, which cut it. The finger was partially medically amputated.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.