Explosion of pressure vessel, piping, or tire · Traumatic injuries or exposures unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at JCB Energy Services, 1658 North Chipmunk Lane, SILVERTHORNE, COLORADO 80498
on — Traumatic injuries or exposures unspecified, affecting the Head unspecified.
Final narrative
An employee was helping with directional bore operations. The drill hit a high-pressure gas line. The employee was thrown up into the air and fell to the ground. The employee suffered injuries to the front and back of the head, a broken wrist, and abrasions to the legs.
Hospitalized Head unspecified Pressurized containers n.e.c.
An employee was conducting torching operations using oxygen and propane to cut metal beams within the recycling laydown area. The employee used a hose with an air chuck connection to fill up the yard pickup truck's back tire with oxygen. The tire blew up which caused the oxygen to ignite. The employee sustained fractures, internal injuries, burns, and lacerations.
An employee was replacing a tire on a wheelbarrow when the tire exploded. The employee sustained fractures to his right hand and an abrasion to the right side of his face. The employee was hospitalized and required surgery on his right hand.
An employee was checking the pressure gauge on a unit from a step stool. As he was stepping down, the ball valve ruptured and grazed the side of his left hand. The employee was hospitalized with an injury to the hand near the thumb and required surgery.
A mechanic was changing out an air spring on a concrete mixer truck cab. The air spring was receiving higher air pressure than it was designed to use, because of a faulty level check valve. This increased pressure caused the air spring to burst. Its top portion separated and struck the employee's left forearm, causing a laceration and fracture. The employee was hospitalized, requiring surgery.
An employee was hydro testing and pressurizing a pipe when it blew. The lid struck the employee, causing a gash to his elbow and injury to his abdominal area that required surgery.
More severe injuries in this industry (NAICS 238210)
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.