CCA Midwest, Inc.

An employee was standing on trusses while installing shaftwall and metal channel. He slipped from the bottom chords of the 2x6 trusses and fell approximately 1 foot. A metal C-channel caused a severe laceration to his wrist and ulnar artery.

An employee was rigging prefabricated residential home deck panels on a trailer. He stepped backward and fell 9 feet off the trailer to the asphalt road. The employee sustained a blood clot on the brain and fractured ribs.

A carpenter was installing plywood while on an 8-foot ladder. He was stepping down when he fell from the ladder and impacted a concrete stake on the ground. The employee sustained fractured ribs and a collapsed lung.

An employee was carrying a pressure-treated 2x6 board while plating a foundation. The employee put the board on an anchor bolt when a 3-inch sliver of wood got caught in his hand, resulting in a punctured tendon.

An employee was descending an extension ladder after installing tape on house wrap around a second-floor window. He fell off the ladder and landed on the ground about 10 feet below, landing on dirt and gravel and suffering a fractured lower-back vertebra.

An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.

An employee was manually moving a tall cart filled with pints of ice cream within the facility. While transferring the cart toward the exterior of the receiving area, the cart passed over a floor drainage grate, became unstable, and fell toward the employee, pinning him underneath. The cart and its contents landed on his lower right leg, resulting in multiple fractures.

An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.

An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.

An employee was transporting a cart containing instruments and packs to the operating room. The cart tipped over and fell on top of the employee. They sustained pain in their lower back and radiculopathy in their lower extremities.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was on a 6-foot ladder, working to nail a 2-by-4 on a hotel carport ceiling. He lost his balance and his muddy boots slipped. He then fell and his foot lodged in the ladder. His foot was broken in two places and he was hospitalized.

An employee was installing a ceiling joist for a residential home when they fell from a framing structure and landed on the ground 8 feet below. The employee's right arm was fractured.

On September 16, 2025, a employee was moving a dolly with seven drywall sheets. The wheel of the dolly got stuck. The material tipped over and fell onto the employee's left foot, fracturing their tibia.

An employee was installing 80-foot-long trusses onto a 150-foot by 80-foot post-frame building. The employee worked from the north lift and then on the trusses about 20 feet up to install bracing. While installing diagonal bracing on the top chord, the trusses collapsed, causing the employee to fall approximately 20 feet to the concrete and be struck by the falling trusses. The employee was hospitalized with a fractured pelvis and a concussion.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.