Turner Holdings, LLC

While walking between buildings, an employee tripped on the step up onto a sidewalk. The employee fell, sustaining a hip fracture that required hospitalization and surgery.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was performing rear brake shoe service on a truck. The employee was using a prybar to remove a spring when the spring slipped from the S-cam and amputated his left index fingertip.

An employee was unjamming a case that was stuck in a case washer machine when their pants became entangled in a chain, causing them to be sprayed with hot water from the machine. They employee suffered burns from the hot water.

An employee was cleaning out a butter fat tank. The employee slipped and fell, suffering a broken right leg.

An employee was clearing a cup jam on a cup conveyor when their left hand was caught between the conveyor and an idler roller located on another conveyor line directly above the jam. The employee received an abrasion and friction burn to the hand that required hospitalization.

An employee was performing routine maintenance on an air valve when their right ring finger became caught in the valve. The employee sustained an amputation to the fingertip.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.