REEDSBURG, WISCONSIN—
M&W FABRICATION & REPAIR, LLC
Pedestrian struck by vehicle in nonroadway area unspecified · Traumatic injuries or exposures unspecified
At a glance
Federal OSHA recorded a severe workplace injury at M&W FABRICATION & REPAIR, LLC, 1440 Laukant St, REEDSBURG, WISCONSIN 53959 on — Traumatic injuries or exposures unspecified, affecting the Ears and facial region unspecified.
Final narrative
An employee was walking across a yard while performing contract work at a job site. The employee was run over by an end loader, resulting in facial injuries that required surgery and a laceration on their leg. The employee was hospitalized.
Similar incidents · Same event type
TAHOKA, TEXAS—
New Home Co-Op
An employee was painting a round module when a front-end loader ran over his right leg and crushed it.
JACKSONVILLE, FLORIDA—
Parsec LLC
An employee was operating a switch truck at a rail yard. He got out of the switch truck to unlock a container that was attached to a unit in front of him. The switch truck rolled and pinned the employee against the container. The employee sustained a fractured pelvis, a ruptured spleen, and a possible spinal cord injury.
ROUND ROCK, TEXAS—
Lowe's Home Improvement LLC
On October 16, 2025, an employee was entering a parking lot after completing their work shift when they were struck by a vehicle being operated by a customer. The employee fell backward from the impact and the back of their head struck the asphalt. The employee was hospitalized due to brain bleed and a skull fracture.
PEORIA, ILLINOIS—
JIMAX Landscape LLC
An employee was moving branches and other material when they were struck in the leg by the track of a skid-steer loader, resulting in an ankle and lower leg injury.
AURORA, ILLINOIS—
United States Postal Services
An employee was waiting for an operator to bring mail over to a mail sorting machine when she became pinned between the machine and a stack of pallets being pushed by a powered industrial truck (PIT). The employee suffered bruising and swelling on her hips, lower back, knees, and left side; a puncture wound to her left thigh from a machine screw; a crushed right hand with numbness and tingling; numbness to the left big toe; and a right wrist sprain.
More severe injuries in this industry (NAICS 811310)
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
NORTHLAKE, TEXAS—
Crown Lift Trucks
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
VALHALLA, NEW YORK—
Spellman High Voltage Electronics Corporation - Valhalla
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
LAKE PANASOFFKEE, FLORIDA—
Ring Power Corporation
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.