Struck by running powered equipment n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Pike Electric LLC, 411 Tall Pines Road, WEST PALM BEACH, FLORIDA 33413
on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
An employee was retrieving something from a work truck. One of the truck's outriggers lowered onto the employee's left foot, breaking it.
An employee had just exited a truck that had been parked at a yard. He was locking the truck's side bin when the truck's outrigger came down on his left foot and broke it. He was hospitalized.
An employee was going to retire an old pole. While climbing the pole, the pole broke at ground level and the employee fell. The employee sustained a fractured left arm and three fractured ribs.
Employees were changing out a pole. They were moving the center phase conductor when an arc flash occurred and an employee sustained burns to their face.
An employee was drilling a pilot hole for a new primary in a pad-mount transformer and sustained electrical burns to their right middle and little fingers, wrist, and right and left big toes.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
More severe injuries in this industry (NAICS 238210)
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.