Struck by door, gate, window · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Casella Waste Systems, Inc., 424 River Rd, LEWISTON, MAINE 04240
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was pushing a baler door that weighed about 500 pounds closed. A pair of wire cutters fell between the door and the baler wall. The employee was retrieving the wire cutters when the door closed, crushing the employee's right index finger against the baler wall and causing a partial amputation to the finger.
Amputation Other finger(s) n.e.c. Doors, hatches vehicle and machine cabin
More severe injuries at Casella Waste Systems, Inc.
An employee was riding on the back of the dump truck in the engineered location and fell to the ground. The employee suffered a head injury that bled, lost consciousness, and sustained a fractured shoulder.
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
A building engineer was inspecting a generator. As he closed the generator enclosure door, his right ring finger was caught between the door and the door frame. The fingertip was amputated.
An employee was taking out the trash through the storeroom door when the storeroom door closed on their left index finger. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 562219)
An employee was driving an ATV when it overturned and rolled onto its side. The employee sustained a fractured elbow requiring hospitalization and surgery.
An employee was elevating an auger when the auger shifted. He went to stop the auger from shifting when it struck him, resulting in injuries to his left ankle and pelvic bone.
An employee was training to use an industrial shredding machine. While he was dumping a box, the pulley on a conveyor caught the tongue of his right shoe and pulled his third toe into a pinch point between the conveyor belt and the pulley drive. The employee sustained an amputation to their toe.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.