105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Helmerich & Payne Drilling, Inc.

Struck by running powered equipment unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Helmerich & Payne Drilling, Inc., 31.5498910 N / Long: -101.6812463 W, MIDLAND, TEXAS 79701 on — Fractures , affecting the Forearm(s).

An employee was working to straighten up a lifting sub for a reamer while it was inside the automated floor wrench. The spinner doors closed, catching the employee's right forearm. The employee sustained a fractured right radius and a displaced fracture of the right ulna. The employee was hospitalized and required surgery.

Hospitalized Forearm(s) Drilling and extraction machinery unspecified

Helmerich & Payne Drilling, Inc.

While bringing a torque tube and grabber box in to close the grabber door, an employee went to shift the torque tube with his right hand. When he reached up with his left hand, the grabber box slid down and partially amputated his left thumb.

Helmerich & Payne Drilling, Inc.

An employee was working on the rig floor when an electrical wire was plugged into an outlet and an arc flash (600V) occurred. The employee sustained burns to his left forearm, thumb, and index finger.

Helmerich & Payne Drilling, Inc.

An employee was stowing a machine when his right arm was caught between the machine and the derrick leg, resulting in a displaced radial fracture and a hairline ulnar fracture.

Helmerich & Payne Drilling, Inc.

An employee was picking up a trip nipple with a hoist when the hoist became hung on top of a drive. The employee used the left hand to free the hoist. Once the hoist was freed, the trip nipple sprung up and caught the employee's left hand between the nipple and the elevator, breaking it.

Helmerich & Payne Drilling Inc.

An employee was removing a 4" valve with a flange. As he was removing the valve, his right pinky finger was caught between the flange of the valve and the pad-I, amputating it at the first joint.

View Helmerich & Payne Drilling, Inc.'s full OSHA safety record →

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

TABER EXTRUSIONS, LLC

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

American Flowform and Machining, LLC

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

Hall Drilling, LLC

An employee was stepping down off a 6-inch containment platform to finish loading his truck, when his right ankle rolled. The employee sustained a fractured tibia and fibula at the right ankle and required surgery.

C. Miller Drilling Inc

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

Amercian Well Service Llp

An employee was working to remove a stuck fish tool from a drill shoe. Their thumb was struck by a hammer, resulting in amputation.

Axis Energy Services

An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.

ROBINSON DRILLING OF TEXAS, LTD

An employee was rigging up a location. He was using an Allen wrench to free up rotation and start the drawworks engine manually. The engine rotated and his left little finger became caught between the Allen wrench and the engine. The employee sustained an amputation to his little finger and fractures to his wrist.

T G Meat Center LLC

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

Professional Flooring Supply

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

EnviroSafe Demil LLC

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

Regency IHS of Fairwinds Halletsville, LLC

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.