Struck by dislodged or detached object(s) · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at West Logging, LLC, 35.08698 -92.7461, PERRY, ARKANSAS 72125
on — Fractures , affecting the Trunk and other lower extremities.
Final narrative
On June 23, 2025, an employee was assisting with a tire replacement. As the employee was returning with tools, two co-workers were positioning the tire on the hub. The tire released pressure, causing a piece of the split rim to strike the employee. They were hospitalized with a fractured left ankle and pelvis.
Hospitalized Trunk and other lower extremities Wheels, tire rims
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.
An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
More severe injuries in this industry (NAICS 113310)
An employee was working with a group of tree trimmers to trim a tree that was approximately 66 feet high and 28 inches in diameter. When the tree fell, it struck the employee. He was hospitalized with multiple fractures to the left side of his body, including his head.
On July 18, 2025, at approximately 1:09 PM, an employee was moving a trailer-mounted de-limber. He set his ground saw on the de-limber trailer and then got off the loader and stood to the side of the ground saw. A grapple skidder was raising the trailer slightly so he could throw the chain under the trailer to secure the ground saw. He then turned around and the ground saw slid off the trailer and struck his back. The employee was hospitalized with four fractured vertebrae.
An employee was cutting a tree. As they were walking away, part of the tree broke off and struck the employee. The employee sustained five broken ribs and a punctured lung.
An employee was climbing down a tree after setting a rope to allow the tree to be removed. A knot at the end of his climbing system failed and he fell from the tree, landing about 35 feet below. He suffered fractures to the pelvis and spinal cord and was hospitalized.
An employee felling a tree using a chainsaw. He was moving away from the tree he had just cut using a planned path, but he was struck by a branch of the falling tree. His collarbone was fractured and it punctured his lung.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.