105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Pine Bluff Arsenal

Struck by running powered equipment unspecified · Cuts, lacerations, punctures without injury to internal structures

Federal OSHA recorded a severe workplace injury at Pine Bluff Arsenal, 10020 KABRICH CIRCLE, PINE BLUFF, ARKANSAS 71602 on — Cuts, lacerations, punctures without injury to internal structures, affecting the Thumb(s).

An employee was retrieving a can from an ammunition can sealer. The machine severely lacerated his right thumb, which required hospitalization and surgery.

Hospitalized Thumb(s) Packaging, wrapping, bundling machinery

PINE BLUFF ARSENAL

An employee was operating a forklift on the roadway near a building. While backing up, the rear tires left the pavement and sank into the soft ground causing the forklift to flip onto its side. The employee s right leg and foot were trapped underneath the forklift resulting in multiple broken metatarsals.

PINE BLUFF ARSENAL

An employee was sampling slugs at a press when their right thumb was amputated above the first knuckle in the die of the press.

PINE BLUFF ARSENAL

An employee was investigating a water leak when they slipped and fell on the ice, resulting in an arm fracture.

PINE BLUFF ARSENAL

An employee was working at a station that packs parachutes into canisters. The hydraulic ram on the parachute packing machine initiated out of sequence, catching the employee's glove. She was able to extract her hand from the glove, but not before the end of the ram entered the canister and amputated her right middle fingertip.

Pine Bluff Arsenal

An employee slipped on the step of the tractor trailer delivery truck and struck his right knee on the step. He was hospitalized for surgery.

View Pine Bluff Arsenal's full OSHA safety record →

Inteplast Group

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

TABER EXTRUSIONS, LLC

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

American Flowform and Machining, LLC

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

Omya Inc.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

GXO Logistics

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

PVH, Corp.

A temporary employee was punched in the face by another temporary employee. He suffered a laceration to the eye.

Ace Hardware International LLC

An employee was backing up a powered industrial vehicle. Her left hand was caught between the vehicle and a rack, and the wrist was broken.

Agave Wire Ltd

An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.

M&M Quality Solutions

An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

The Goodyear Tire & Rubber Company

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

Big River Steel, LLC

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

American Tile & Marble Co., Inc

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

Johnson Industrial Coatings, LLC.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.