Exposure to electric arc · Electrical burns any degree
At a glance
Federal OSHA recorded a severe workplace injury
at Exacore Staffing LLC, 11975 Private Rd. 6067, IRAAN, TEXAS 79744
on — Electrical burns any degree , affecting the Part of body unspecified.
Final narrative
Two employees were working by a switch gear. Upon opening the switchgear, employee 1 noticed some loose bolts. As employee 1 looked back, employee 2 reached into the switchgear and an arc flash occurred. They were both severely burned. Safety gear was worn at the time.
Hospitalized Part of body unspecified Switchboards, panels, fuses
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee was walking on a concrete storm water drain canal when they tripped on the unlevel concrete surface and fell, breaking their left ankle. The employee was hospitalized for surgery.
Employees were inspecting a broken telephone pole to remove it and attached the cable from the roadway. They removed the broken pole from the cable/strand so they could raise the cable/strand up and attach to a tree to gain clearance until it could be repaired. The injured employee cut the top (above the cable/strand) of the pole off and it fell to the ground in the roadway. They then moved that piece out of the roadway. This left a 6-foot piece still attached to the strand (below the strand) at about a 45-degree angle to the ground. When the remaining 6-foot piece was cut from the cable/strand, it broke and swung toward the injured employee, knocking him to the ground. The employee sustained a fractured skull and a fractured L5 vertebra.
An employee was manually moving a dolly (loaded with 7 sheets of drywall) out of a workspace when the dolly tipped over and landed on his right ankle. The employee was hospitalized with a fractured ankle and required surgery.
An employee was on a 28-foot extension ladder troubleshooting equipment at a residential property. While on the ladder, the strand cable supporting the extension ladder failed, causing the ladder and the employee to fall the ground and into the roadway. The employee sustained facial injuries and a dislocated left elbow.
While installing a server into a data rack, an employee fell 6 feet from a ladder to the floor. The employee sustained fractures to his left shoulder and arm, as well as a bruise and laceration to his forehead.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.