Exposure to electric arc · Electrical burns any degree
At a glance
Federal OSHA recorded a severe workplace injury
at Martinsburg - Quad/Graphics, Inc., 855 Caperton Blvd, MARTINSBURG, WEST VIRGINIA 25403
on — Electrical burns any degree , affecting the Head and extremities.
Final narrative
A press was having a paster failure and the crew was working to get the ink on the paper. A press operator grounded himself and was entering the press unit when something flashed. The employee sustained third-degree burns to his head and left arm.
Hospitalized Head and extremities Printing machinery n.e.c.
More severe injuries at Martinsburg - Quad/Graphics, Inc.
Around 12:45 PM, a clamp truck operator went to remove a piece of orange strap from a clamp truck that was parked outside of the office. The strap fell into a gap between the frame and the hood of the truck. The strap became caught in the engine's fan and also wrapped around the employee's hand when he went to grab it. The strap was pulled tight against the frame of the clamp truck, causing lacerations and fractures to the employee's hand. The employee was hospitalized and required surgery.
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
The injured employee's standup forklift had mechanical issue with a tire. The injured employee was inside their forklift to help steer it while it was being pushed up the ramp by another forklift. As the other forklift started to move up the ramp, it's forks moved and went into the driver's space of the disabled forklift. The fork penetrated the injured employee's left shoe, fracturing the two middle toes and injuring the first toe. The employee was hospitalized and required surgery.
Around 12:45 PM, a clamp truck operator went to remove a piece of orange strap from a clamp truck that was parked outside of the office. The strap fell into a gap between the frame and the hood of the truck. The strap became caught in the engine's fan and also wrapped around the employee's hand when he went to grab it. The strap was pulled tight against the frame of the clamp truck, causing lacerations and fractures to the employee's hand. The employee was hospitalized and required surgery.
At 12:00 p.m. on August 13, 2025, an employee was unloading a 1,100-pound roll of paper from a skid when the roll fell onto his right leg. The leg was broken.
A temporary employee was operating a shrink wrap heating machine. When the machine cycled, the heating element came into contact with the employee's left hand, resulting in third-degree burns. The employee was hospitalized.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.
An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.