LUCK, WISCONSIN—
MacDonald & Owen Lumber Company
Caught, entangled in running powered equipment normal operation · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury at MacDonald & Owen Lumber Company, 230 Duncan S, LUCK, WISCONSIN 54853 on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
On September 3, 2025, a lumber handler was cutting a board with a circular saw when the saw blade grabbed his glove and pulled his hand into the saw. The blade amputated his left index finger and lacerated his left ring finger.
Similar incidents · Same event type
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
FRANKLIN PARK, ILLINOIS—
Olympia Food Industries Inc.
An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.
TEXARKANA, TEXAS—
Day & Zimmermann Lone Star LLC
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
PASCAGOULA, MISSISSIPPI—
Ingalls Shipbuilding
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
CLEVELAND, OHIO—
Galaxy Balloons Inc.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 321912)
INWOOD, WEST VIRGINIA—
UFP Structural Packaging, LLC
An employee was operating a panel saw when a piece of wood got stuck in the dust collection vent. He was clearing the jam when the pressure bar (that holds the material) came down on his right hand and crushed his fingers. He sustained partial amputations to the middle and ring fingertips.
HOLIDAY CITY, OHIO—
Menard, Inc.
An employee was adjusting self-dumping steel hopper to get it to latch onto the tines of a forklift. He rocked the hopper back and forth to dump. The hopper slid off the forklift and fell about 2-3 feet down onto his legs. The employee sustained a cut on his head, a bruise on his face, and both his ankles were fractured.
LIVINGSTON, MONTANA—
Sun Mountain Lumber
An employee was using his left arm to pull a piece of lumber from a chain, which was on his right side, to stack it on a lumber bunk positioned to his left. His left middle fingertip was crushed between the end of the lumber he was moving and the stationary lumber stack behind him, resulting in an amputation.
ALICEVILLE, ALABAMA—
Lewis Brothers Lumber Company, Inc.
An employee was pulling lumber through a chop saw when four of their left fingers were amputated.
RICHLAND CENTER, WISCONSIN—
Welter Forest Products, Inc.
An employee was changing the saw band and guide blocks on the resaw at the end of a shift. As the employee reached to change the guide block on the right side, they contacted the power cable for the photo eye and sustained a 110-volt shock from an exposed wire. The employee was shocked under their arm and on the right side of the body and sustained a burn.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.