Vehicle or machinery fire · Thermal burns second degree
At a glance
Federal OSHA recorded a severe workplace injury
at U-J Chevrolet Co., Incorporated, 7581 Airport Blvd, MOBILE, ALABAMA 36608
on — Thermal burns second degree, affecting the Trunk and other upper extremities.
Final narrative
An employee was performing diagnostic work on a vehicle engine. As the employee was leaning over the front of the vehicle, the engine was activated. A fuel leak had produced fumes around the engine, and the ignition spark ignited them. The employee suffered second-degree burns to both hands, both biceps, and the upper chest area.
Hospitalized Trunk and other upper extremities Roadway vehicle motorized, unspecified
Employees were securing the fuel line of an outboard motor in preparation for removing the motor from a small vessel located in the equipment yard. A gasoline-related fire occurred and one employee sustained burns to both hands and forearms.
Two employees were replacing cartridge filters at the recycle oil filter in a hydrocracking unit. While removing compression springs from the top of the filters located within the filter pot, vapors that had accumulated within the filter tubes ignited, causing a flash fire. Both employees suffered burns to multiple body parts and were hospitalized.
An employee was checking the fuel level of a ride-on sprayer. While refueling the sprayer, fuel ignited and the employee sustained burns to their jaw and right thumb.
Two employees were working in the kitchen area of a food trailer. There was a sudden burst of fire in the kitchen, and both employees were engulfed by deflagration of gas which oriented from a propane-powered griddle. They suffered first-, second- and third-degree burns to their head, face, arms, and legs.
An employee was repairing the suspension of a semi-trailer. He was installing an air bag to the suspension when his left ring finger was crushed between the air bag and the suspension mounting beam. The employee was hospitalized.
A mechanic had just finished a repair on a straight truck with a flatbed , which had been lifted using a bottle jack. As the employee was about to remove the jack, it failed. The truck shifted forward, dropped down, and struck the employee's chest. He suffered broken ribs and a broken shoulder.
An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.
An employee was working on a control line when it got jammed with steel strips. They went to unjam the machine and suffered a fingertip amputation to the left middle finger.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.