Super Steel LLC

An employee was setting up a brake press when the press amputated their fingertip.

An employee was moving a part (about 12"x18"x1" thick) by hand from a pallet to a work table. His right thumb was inside a hole in the part. As he pulled the part, the hole closed, amputating his right thumb tip.

An employee was working to refuel a truck. While handling the fuel hose(s), she experienced pain in her stomach. After completing the task, the employee drove back to the pad and the movement aggravated her abdominal pain. The employee was hospitalized with an abdominal sprain/strain.

An employee was using a weed eater, moving it from side to side. He suffered a pinched nerve in the neck that caused numbness in the back and arms. He was hospitalized.

On March 27, 2025, a truck driver had pulled up to a riser to load fuel into their truck. The driver was pulling down on the loading arm at the fuel terminal, or lifting the fuel loading arm when they felt pain in their abdomen. The employee sustained a hernia.

An employee was using a Johnson bar to inch about 1,800 pounds of electrical equipment. The employee's right foot was on the wheel of the bar to keep it from slipping out of gear. The bar slipped, and the employee's momentum shifted from his right foot to his left. He suffered a broken left tibia and fibula.

On February 4, 2025, an employee was emptying a half-full wet vacuum machine when they rotated with the machine and sustained two bulging discs in their back. The employee was hospitalized.

On October 21, 2025, an employee was operating a saw when a pneumatic clamp caught their right middle finger. The employee suffered a partial amputation to the finger.

An employee completed an end cut on a metal shim and started transferring the metal shim from the saw conveyor to two saw horses in the area. The employee set one end of the shim (7 feet long x 8 inches wide, weighing 218 pounds) on one of the saw horses, then slid the other end onto the other saw horse and the shim fell from the first saw horse. The employee's left index fingertip was pinched between the saw horse and the shim, resulting in a skin avulsion. The fingertip was amputated later.

An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.

An employee was moving steel beams with an overhead crane when the bundle struck a bollard and became unstable. As the employee reached to stop the material from shifting, his thumb was pinched in-between the beams, resulting in a partial amputation.

An employee was rigging a steel joist to be lifted by a crane. The joist fell and pinned the employee against the concrete ground. The employee sustained fractures to multiple ribs, his right arm, right tibia, and an open fracture to his right ankle, as well as a dislocated right hip.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.