WICHITA, KANSAS—
White Star Machinery
Fall to lower level from collapsing structure or equipment 6 to 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at White Star Machinery, 3223 N Hydraulic Ave, WICHITA, KANSAS 67219 on — Fractures , affecting the Wrist(s).
Final narrative
An employee was climbing up a fixed ladder alongside a building to inspect a roof leak. The employee fell off the ladder and landed on the ground about 15 feet below. The employee was hospitalized with fractures to both wrists.
More severe injuries at White Star Machinery
TOPEKA, KANSAS—
White Star Machinery
An employee was lifting a hydraulic cylinder onto a bench vise for repairs. The vice rotated and the employee's left thumb was caught in a fitting hole. Then the cylinder rotated and caught the employee's thumb against the vise amputating the fingertip.
View White Star Machinery's full OSHA safety record →
Similar incidents · Same event type
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
CALDWELL, IDAHO—
UPSON COMPANY
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
WASHINGTON, DISTRICT OF COLUMBIA—
Goodrich Fire & Life Safety
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
PANAMA CITY, FLORIDA—
Everon LLC
An employee was working from an extension ladder, installing a security camera. The ladder fell out from under the employee, who fell to the ground 12 feet below and broke his right femur.
More severe injuries in this industry (NAICS 333111)
WINFIELD, ALABAMA—
King Kutter, Inc.
An employee was welding lift arms when their shirt caught fire due to welding sparks or heat, resulting in thermal burns to their upper chest.
SALINA, KANSAS—
Great Plains Manufacturing Inc.
On September 16, 2025, an employee went to pull a weld stand when he tripped and fell, landing on the floor on his right hip. The employee suffered hip and fibula fractures that required hospitalization and surgery.
LINDSAY, NEBRASKA—
Lindsay Irrigation Solutions, LLC
An employee was accessing a tensioned hook that required a hoist mechanism to be engaged. He was unhooking the lift hook from a shelf column when the "up" button was pressed, which released the tension on the pneumatic air hoist. The employee's right index finger was caught between the hook and the column, resulting in a soft tissue amputation and fracture to the fingertip.
HASTINGS, NEBRASKA—
T-L IRRIGATION CO.
A crane was lifting a pole out of a zinc bath in the galvanizing department when the chain attached to the pole broke. The pole fell back into the bath and liquid zinc splashed onto an employee, who suffered third-degree burns to an arm, the abdomen, the torso, the upper left side of the chest, an ear, the neck, and a hand.
WATERTOWN, SOUTH DAKOTA—
Macksteel Warehouse, Inc.
An employee was using the forks on a forklift to support a 1-inch thick sheet of metal. The forklift was lifting the sheet up two inches from the original process bed when a 1-inch thick metal skeleton (cut out of the sheet of metal) dropped through the original sheet onto the employee's left ring fingertip. A quarter inch of the fingertip was amputated.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.