105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Ahresty Wilmington Corporation

Struck by running powered equipment during maintenance, cleaning, testing · Amputations, avulsions, enucleations unspecified

Federal OSHA recorded a severe workplace injury at Ahresty Wilmington Corporation, 2627 S. South Street, WILMINGTON, OHIO 45177 on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..

A maintenance technician was investigating a tool issue. He was pressing the tool clamp/unclamp button with his right hand when his hand slipped off the button, causing the spindle to clamp on his distal left index finger, resulting in amputation.

Amputation Other finger(s) n.e.c. Metal, woodworking, and special material machinery unspecified

Ahresty Wilmington Corporation

An employee was attempting to clear a jam on a rotary mill machine when the employee's fingers were caught in the running cutting tool, resulting in a left middle fingertip amputation.

Ahresty Wilmington Corporation

An employee was attempting to pull a 12" die when a synthetic web sling that was being hoisted by an overhead crane slid unexpectedly back down the shaft of the die, catching an employee's left thumb between the sling and the die. The employee's left thumb was amputated.

Ahresty Wilmington Corporation

An employee was walking when she tripped over a bolt that was holding a metal plate to the floor and broke her right femur head.

Ahresty Wilmington Corporation

An employee was troubleshooting a motor for air leaks when his fingers contacted the fan, amputating the tips of the left middle and ring fingers.

View Ahresty Wilmington Corporation's full OSHA safety record →

Envelope Seal Insulation, Inc

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

CFL USA, LLC

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

US Aluminum Inc

An employee had just fixed a loose aluminum coil on a rack while raised about 11 feet into the air on a forklift. While he was being lowered, he fell from the forks to the floor, suffering two fractured ribs, a punctured lung, and a fractured cervical vertebra. He was hospitalized.

Golden Aluminum, Inc.

An employee was troubleshooting a caster machine. While removing a cap cover, the catch pan moved up and caught his right arm against the caster blocks. He suffered lacerations and an open break of the ulna. He was hospitalized.

Reynolds Consumer Products LLC

At 11:27 a.m. on March 15, 2025, an employee was transferring film to start a new roll when the winder shaft failed to seat properly in its cradle. The employee was knocking the unseated shaft down when his right thumb was caught. The employee sustained an amputation to right thumb.

Steel Dynamics - Southwest - Sinton Division

Two employees were riding in a utility terrain vehicle down a loose gravel path. The vehicle's front wheel dug into the gravel, and it rolled over onto its side. The injured employee struck the interior of the vehicle (including the steering wheel) before landing on the driver. The injured employee suffered a 6-inch head laceration, a broken collarbone, and six broken ribs.

Steel Dynamics - Southwest - Sinton Division

An employee was placing a secure device on a large steel coil. The employee was pulling on a manual crimping tool when it slipped, and the sudden release caused him to stumble backward, fall into the opening between the coil saddles and down into a pit below. The employee sustained fractured ribs, a laceration to the head, and left leg/knee pain.

United States Postal Service

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

Foundation Steel, LLC

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

GXO Logistics

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

Abbott Electric Inc

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

American Electric Power Company

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.