Explosion of nonpressurized vapors, gases, or liquids · Thermal burns second degree
At a glance
Federal OSHA recorded a severe workplace injury
at Shumard Corporation, 248 Ross Rd, MINERAL WELLS, TEXAS 76067
on — Thermal burns second degree, affecting the Exterior and musculoskeletal structures of the back unspecified.
Final narrative
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
Hospitalized Exterior and musculoskeletal structures of the back unspecified Multiple chemicals and hazardous materials
Employee 1 was investigating a gas odor. While employee 1 was checking the equipment, a gas explosion occurred, resulting in a fire that burned the employee's face. Employee 2 entered the area and a second explosion occurred, causing burns to their face and arms. Employee 2 was hospitalized.
At about 7:30 p.m. on August 12, 2025, an employee was using a backhoe to excavate accumulated slag and debris from a furnace tap area and ladle pit. Residual water in the material had not fully evaporated; upon disturbance, it reacted violently, resulting in an explosion. The employee suffered first, second, and some third-degree steam burns, mainly to the arms and knees with additional burns to the hands and the back of the neck. The employee was hospitalized.
An employee was cutting glass for a custom windshield and was using denatured alcohol during the cutting process. The denatured alcohol caught fire and the flame traveled to a gallon-sized container of the liquid. The can exploded and the employee sustained second- and third-degree burns from the waist up.
On April 18, 2025, an employee was cutting the lid off an empty 55-gallon drum using a plasma cutter. The drum originally contained a flammable liquid and residual liquid inside the drum ignited and exploded. The employee was hospitalized with burns to the face, chest, and arms.
An employee was painting the inside of a new parts-cleaning machine for electric motors and motor parts when the airborne paint exploded and burned the employee. The employee sustained burns to their neck, lower forearms, and hands.
More severe injuries in this industry (NAICS 326199)
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
At 5:00 p.m. on September 24, 2025, an employee was helping remove a fixture from a press when it slipped off the track. The employee was working to lift the fixture and set it on a mobile cart when his left middle fingertip was pinched between the fixture and a post on the cart. The employee suffered an amputation to the fingertip.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.