Wieland Concast

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

On August 12, 2025, an employee had just finished skimming slag from the top of a ladle of molten metal. They began to walk away while an overhead crane began moving the ladle. The latch that prevented the ladle from tipping came loose. The ladle tipped and spilled molten metal onto the floor and it burned both of the employee's feet.

On August 4, 2025, at 7:00 AM, an employee was approaching an area to put out a fire with an ABC fire extinguisher when an unknown material exploded and contacted their face. The employee sustained a laceration to the right cheek with an object penetrating the nasal cavity. The employee was hospitalized.

An employee was lifting a cope mold using a mold manipulator. While the mold was suspended in the air, he reached under it to retrieve the rollover pin. The mold slipped out of the manipulator and fell onto his right hand, causing a severe degloving of the right forearm and hand. He was hospitalized.

An employee had just put a dock plate in place. While stepping back over the plate, the employee tripped and fell onto it. The employee suffered a broken hip.

At 11:49 p.m. on July 11, 2024, an employee was sanding/grinding a circular aluminum casting on a belt sander/grinder. The casting slipped, and the employee's left thumb came in contact with the edge of the belt. The employee suffered a partial amputation to the thumb.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.