Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HORIZONTAL WELL DRILLERS

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of HORIZONTAL WELL DRILLERS in 2410 BODINE MOUNTAIN ROAD/DCNR 100-5H #50032, TROUT RUN, PA 17771 (NAICS 213111). OSHA activity number 314157405.

Watch Horizontal Well Drillers — free Get an email when a new federal OSHA severe-injury report for Horizontal Well Drillers is published. One employer, no account, unsubscribe in one click.
Site address
2410 BODINE MOUNTAIN ROAD/DCNR 100-5H #50032
City
TROUT RUN
State
PA
ZIP
17771
Mailing
2915 STATE HIGHWAY 74 S, PURCELL, OK 73080
Inspection type
Unprogrammed Related (G)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
213111
SIC code (legacy)
1381
Employees
10
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1500.00 · Current $100.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer
did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that,
employees were exposed to aggravated injuries and/or death due to
emergency contact
numbers not posted at a remote job site:
a) 2410 Bodine Mountain Road, Loyalsock State Park, Trout Run, PA, Rig #6:
Telephone numbers, location, and other relative information pertaining to
availability
of medical personnel, transportation, and medical facilities was not
posted and
available at the drilling site when a subcontractor was severely injured
by a hammer
union that blew off a manifold as he operated a valve, on or about
06/02/10.
Among other methods, two feasible and acceptable methods to abate this
hazard is to:
1) Ensure telephone numbers, location, and other relative information
pertaining to
availability of medical personnel, transportation, and medical facilities
are available and
posted at all drilling and well servicing sites, in accordance with
American Petroleum
Institute, API-54, Recommended Practice for Occupational Safety of Oil and
Gas Well
Drilling and Servicing Operations Manual, page 7, Section 4.2.1.
2) Ensure prompt medical attention is available in case of serious injury
at each work area,
in accordance with American Petroleum Institute, API-54, Recommended
Practice for
Occupational Safety of Oil and Gas Well Drilling and Servicing Operations
Manual, page 7,
Section 4.2.2.
ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $100.00
  • — Z (S) $1500.00

5(a)(1)

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $4200.00 · Current $4200.00
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer
did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees in that,
employees were exposed to a struck-by hazard:
a) 2410 Bodine Mountain Road, Loyalsock State Park, Trout Run, PA, Rig #6:
A
hammer union under approximately 600 p.s.i. of pressure, was not properly
secured
to prevent unsafe movement. The 3/16" steel cable used on the union broke
under
pressure, allowing the hose connection to separate violently , on or about
06/02/10.
b) 2410 Bodine Mountain Road, Loyalsock State Park, Trout Run, PA, Rig #6:
A
hammer union on an air manifold under approximately 600 p.s.i. of pressure
was
mismatched in that the halves did not have the same pressure ratings,
exposed a floor
hand to possible serious injury when a violent separation occurred, on or
about
06/02/10.
Among other methods, one feasible and acceptable method to abate this
hazard is to:
1) Ensure that each section of flexible high pressure hose is properly
secured to prevent
unsafe movement in accordance with American Petroleum Institute API RP-54,
Recommended Practice for Occupational Safety of Oil and Gas Well Drilling
and Servicing
Operations Manual, page 20, section 9.13.3.
2) Ensure that each hammer union is made up of like halves with the same
pressure ratings
and thread type in accordance with American Petroleum Institute API RP-54,
Recommended
Practice for Occupational Safety of Oil and Gas Well Drilling and
Servicing Operations
Manual, page 20, section 9.13.5.
ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED

1910.157 C01

Other-than-serious Gravity 01 1 instance 1 exposed
Issued
Abate by

1910.157 C04

Other-than-serious Gravity 01 1 instance 1 exposed
Issued
Abate by

View HORIZONTAL WELL DRILLERS's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 314157405.