Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DOUBLE J FRAMING, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DOUBLE J FRAMING, LLC in 3630 N. EAGLE ROAD, MERIDIAN, ID 83646 (NAICS 238130). OSHA activity number 332791862.

Watch Double J Framing, LLC — free Get an email when a new federal OSHA severe-injury report for Double J Framing, LLC is published. One employer, no account, unsubscribe in one click.
Site address
3630 N. EAGLE ROAD
City
MERIDIAN
State
ID
ZIP
83646
Mailing
3112 SUNTREE STREET, CALDWELL, ID 83605
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.501 B01

Serious Gravity 5 2 instances 3 exposed
Issued
Penalty
Initial $2040.00 · Current $1020.00 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.      a) East end to center area of the structure; On or about February 27, 2012 and at times prior thereto, an employee was performing roof sheathing without a means of fall protection.    b) West end to center area of the structure; On or about February 27, 2012 and at times prior thereto, three employees walked across the tops of trusses between the location of the ladder and the sheathed area without a means of fall protection.    Note: Abatement certification is NOT required for this item.
Recent events (2)
  • — I (S) $1020
  • — Z (S) $2040

1926.28 A

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.28(a): Appropriate personal protective equipment was not worn by employee(s) in all operations where there was exposure to hazardous conditions:      a)  Staging area at the south side of the structure; On or about February 27, 2012 and at times prior thereto, an employee was cutting material operating a 12 inch DeWalt compound miter saw without eye/face protection.    Note: Abatement certification is NOT required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.302 A02

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.302(a)(2): The use of electric cords for hoisting or lowering tools was permitted:      a)  South side facade of the structure; On or about February 27, 2012 and at times prior thereto, an employee utilized the combination of an extension cord and the power cord for a Milwaukee 7 1/4 inch worm drive circular saw to lower it from the roof deck to the ground.    Note: Abatement certification is NOT required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.502 D06 I

Other-than-serious 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
1926.502(d)(6)(i): The snaphook was not designed to be engaged directly to webbing, rope or wire rope:      a) West end, center area of truss span; On or about February 27, 2012 and at times prior thereto, two separate horizontal rope lifelines were wrapped around truss members and the snaphooks were connected to the rope lifeline in lieu of being connected to a fall protection anchoring device.     Note: Abatement certification is NOT required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View DOUBLE J FRAMING, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332791862.