OSHA Inspection: FORGE BUILDING COMPANY, LLC

Issued

2012-07-09 00:00:00

Abate by

2012-07-23 00:00:00

Penalty

Initial $1800.00 · Current $900.00 Reduced

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:    a) South end of hangar: on 03/16/2012 and at times prior thereto, a worker walked underneath workers connecting flashing 21.5 feet overhead without wearing a hard hat.    Note: Abatement certification IS NOT required for this item.

Issued

2012-07-09 00:00:00

Abate by

2012-07-23 00:00:00

Penalty

Initial $3000.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, warning line system and personal fall arrest system, or warning line system and safety monitoring system; or, on roofs 50 feet or less in width, the use of a safety monitoring system alone:    a) South end of hangar: on 03/16/2012 and at times prior thereto, a worker was installing flashing from the hangar roof without fall protection.    Note: Abatement certification IS required for this item.

Issued

2012-07-09 00:00:00

Abate by

2012-08-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a) South end of hangar: on 03/16/2012 and at times prior thereto, a worker exposed to a 21.5 fall was not trained to recognize fall hazards, inspect fall protection gear, wear fall protection gear, and avoid exposures to unsafe conditions.    Note: Abatement certification IS required for this item.