Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BEST FRAMING USA, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BEST FRAMING USA, INC. in 5551 HUNTINGTON ST., MILTON, FL 32570 (NAICS 238130). OSHA activity number 339549263.

Watch Best Framing USA, INC. — free Get an email when a new federal OSHA severe-injury report for Best Framing USA, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5551 HUNTINGTON ST.
City
MILTON
State
FL
ZIP
32570
Mailing
1926 CREIGHTON RD. # D, PENSACOLA, FL 32504
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
9
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a.   On or about January 6, 2014, on the south side of the house, employees were not wearing eye protection while installing framing materials.
Recent events (1)
  • — Z (S) $2400

1926.451 C02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates, mud sills or other adequate firm foundation:  a.   On or about January 6, 2014, on the south side of the house, the scaffold did not have adaquate firm fondations, exposing employees to a 6 feet 3 inch fall hazard.
Recent events (1)
  • — Z (S) $2400

1926.100 A

Repeat Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4800.00 · Current $4800.00
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a.  On or about January 6, 2014, employees working beneath employees installing framing were not wearing hard hats, exposing themselves to the hazard of being struck by falling debris.    Best Framing USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.100(a), which was contained in OSHA inspection number 915923, citation number 1, item number 1and was affirmed as a final order on November 27, 2013, with respect to a workplace located at 5963 Cromwell Dr., Pace, Florida, 32571.
Recent events (1)
  • — Z (R) $4800

1926.451 B02

Repeat Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $5600.00 · Current $5600.00
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:  a.   On or about January 6, 2014, on the south side of the house, employees installing framing materials were using a 2 inch by 6 inch wood plank as scaffold.     b.   On or about January 6, 2014, inside on south side of the house, employees installing framing materials to the ceilings were using a 2 inch by 8 inch wood plank as scaffold.  Best Framing USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.100(a), which was contained in OSHA inspection number 915923, citation number 1, item number 2 and was affirmed as a final order on November 27, 2013, with respect to a workplace located at 5963 Cromwell Dr., Pace, Florida, 32571.
Recent events (1)
  • — Z (R) $5600

1926.501 B13

Repeat Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $5600.00 · Current $5600.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system:  a.   On or about January 6, 2014, on a 7/ 12 pitch roof , employees were not protected from a 10 feet 1 inch fall hazard by the use of a fall protection system.  Best Framing USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.100(a), which was contained in OSHA inspection number 915923, citation number 1, item number 3 and was affirmed as a final order on November 27, 2013, with respect to a workplace located at 5963 Cromwell Dr., Pace, Florida, 32571.
Recent events (1)
  • — Z (R) $5600

View BEST FRAMING USA, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339549263.