Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PRECISION GEAR INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PRECISION GEAR INC. in 112-07 14TH AVENUE, COLLEGE POINT, NY 11356 (NAICS 336411). OSHA activity number 339850000.

Watch Precision Gear INC. — free Get an email when a new federal OSHA severe-injury report for Precision Gear INC. is published. One employer, no account, unsubscribe in one click.
Establishment
PRECISION GEAR INC.
Site address
112-07 14TH AVENUE
City
COLLEGE POINT
State
NY
ZIP
11356
Mailing
112-07 14TH AVENUE, COLLEGE POINT, NY 11356
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336411
Employees
150
Ownership type
A

7 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4500.00 · Current $4500.00
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  A.) On or about Tuesday, July 1st, 2014, 112-04 14th Avenue, College Point, NY 11356  The rotating horizontal spindle of a lapping machine lathe (ML 993) was observed missing a guard exposing employees to amputation hazards.  WRITTEN ABATEMENT DOCUMENTATION IS REQUIRED PURSUANT TO 1903.19
Recent events (1)
  • — Z (S) $4500

1910.303 B02

Serious Gravity 5 1 instance 150 exposed
Issued
Penalty
Initial $4500.00 · Current $4500.00
29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.  A.) On or about Tuesday, July 1st, 2014 112-07 14th Avenue, College Point, NY 11365  Two (2) extension cords were observed daisy-chained together in order to power electrical equipment exposing employees to electrical hazards.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (1)
  • — Z (S) $4500

1910.304 G05

Serious Gravity 5 1 instance 5 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:  A.) On or about Tuesday, July 1, 2014 at 112-07 14th Avenue, College Point, NY 11356  An extension cord used to power electrical equipment was observed missing a grounding pin exposing employees to electrical hazards.        WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (1)
  • — Z (S) $0

1910.179 L03 III D

Serious Gravity 1 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2700.00 · Current $2700.00
29 CFR 1910.179(l)(3)(iii)(d): Pendant control stations were not kept clean, and/or their function labels were not kept legible:  A.) On or about Tuesday, July 1, 2014 at 112-07 14th Avenue, College Point, NY 11356  The pendant control station of an overhead crane was observed missing function labels.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (1)
  • — Z (S) $2700

1910.134 C02 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  A.) On or about Tuesday, July 1, 2014 at 112-07 14th Avenue, College Point, NY 11365  The employer failed to provide employees that use respirators (i.e. dust masks, half-face & full-face respirators) on a voluntary basis Appendix D of the Respiratory Protection Standard.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (1)
  • — Z (O) $0

1910.1200 F05 I

Other-than-serious 3 instances 150 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:  A.) On or about Tuesday, July 1st 2014 at 112-07 14th Avenue, College Point, NY 11365  Chemical bottles/containers were observed missing identification labels affixed to the outer portion of bottles.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 150 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  A.) On or about Tuesday, July 1st 2014 at 112-07 14th Avenue, College Point, NY 11362  The employer failed to provide effective information and training to employees that are required to use hazardous chemicals such as but not limited too; sodium hydroxide and Acustrip to perform their job duties.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (1)
  • — Z (O) $0

View PRECISION GEAR INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339850000.