LOS FRESNOS, TX —
OSHA Inspection: DRAGON PRODUCTS, LTD
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DRAGON PRODUCTS, LTD in 42134 E. FM 510, LOS FRESNOS, TX 78566 (NAICS 332312). OSHA activity number 339887614.
Where did this inspection happen?
- Establishment
- DRAGON PRODUCTS, LTD
- Site address
- 42134 E. FM 510
- City
- LOS FRESNOS
- State
- TX
- ZIP
- 78566
- Mailing
- 42134 E. FM 510, LOS FRESNOS, TX 78566
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 119
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.146 C01
- Issued
- Abate by
- Penalty
- Initial $3000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces: At this jobsite in one of the containers being assembled, three employees were welding inside a nearly completed vessel. The potential for hazardous atmospheres existed in the vessel while welding operations were being conducted. The employer failed to evaluate this work location as a permit-required confined space.
Recent events (2)
- — I (S) $0
- — Z (S) $3000
1910.146 C05 I A
- Issued
- Abate by
- Penalty
- Initial $7000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(c)(5)(i)(A): When the employer used the alternate procedures specified in 29 CFR 1910.146(c)(5)(ii) for entering a permit space, the employer could not demonstrate that the only hazard posed by the permit space was an actual or potential hazardous atmosphere: At this jobsite in a vessel being fabricated, three employees were welding inside a nearly completed vessel where several hazards were present to include: confined space due to limited or restricted means of entry and exit, fall hazards, and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.146 C05 II F
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.146(c)(5)(ii)(F): Employees entered into permit spaces that met the conditions set forth in 29 CFR 1910.146(c)(5)(i) but the atmosphere within space was not periodically tested to ensure that the continuous forced air ventilation was preventing the accumulation of a hazardous atmosphere. Any employee who enters the space or that employee's authorized representative, shall be provided with an opportunity to observe the periodic testing required by this paragraph: At this jobsite, in one of the containers being assembled, three employees were welding inside a nearly completed container where an entrance cover was removed exposing employees to hazards from falling out of the opening and getting caught-in, struck-by, or crushed in the opening if the barrel continued to move, or moved in a direction where an employee could lose footing and fall out.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 D01
- Issued
- Penalty
- Initial $7000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(d)(1): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not implement the measures necessary to prevent unauthorized entry: At this jobsite, in one of the containers being assembled, three employees were welding inside a nearly completed container. The potential for hazardous atmospheres exists in this container while welding operations are being conducted. Employer failed to implement the measures necessary to prevent unauthorized entry.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.146 H01
- Issued
- Penalty
- Initial $7000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(h)(1): The employer did not ensure that all authorized entrants knew the hazards that could be faced during entry, including information on the mode, sign or symptoms, and consequences of the exposure: At this jobsite, in one of the containers being assembled, three employees were welding inside a nearly completed container. The potential for hazardous atmospheres exists in this container while welding operations are being conducted. Employer failed to train employees.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.146 I04
- Issued
- Penalty
- Initial $7000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(i)(4): The employer did not ensure that each attendant remained outside the permit space during entry apparitions until relieved by another attendant: At this jobsite, in one of the containers being assembled, three employees were welding inside a nearly completed container. Employees working in this hazardous condition were not trained and the attendant entered the permit-required confined space leaving his duty position.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.146 J05
- Issued
- Penalty
- Initial $7000.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.146(j)(5): The employer did not ensure that each entry supervisor removed unauthorized individuals who entered or who attempted to enter the permit space during entry operations: At this jobsite, in one of the containers being assembled, three employees were welding inside a nearly completed container. Employees working in this hazardous condition were not trained and the attendant was allowed to enter the permit-required confined space leaving all employees in the permit-required confined space.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.212 A01
- Issued
- Penalty
- Initial $7000.00 · Current $7000.00
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: At the far end of this commercial building, where employees were doing plasma cutting, machine guarding was not provided. Employees were exposed to pinch, caught-in, hazards as the machine moved on a track.
Recent events (2)
- — I (O) $7000
- — Z (S) $7000
More inspections at DRAGON PRODUCTS, LTD
WOOSTER, OH—2025-01-17 00:00:00
DRAGON PRODUCTS, LTD.
LOS FRESNOS, TX—2017-11-14 00:00:00
DRAGON PRODUCTS, LTD
WOOSTER, OH—2017-10-12 00:00:00
DRAGON PRODUCTS, LTD.
CENTER, TX—2015-08-27 00:00:00
DRAGON PRODUCTS, LTD.
CENTER, TX—2015-03-24 00:00:00
DRAGON PRODUCTS, LTD
View DRAGON PRODUCTS, LTD's full OSHA safety record →
More inspections in this industry (NAICS 332312)
WYOMING, MI—2026-07-16 00:00:00
R&M FABRICATION LLC
TRUSSVILLE, AL—2026-07-16 00:00:00
ALL SOUTH STEELWORX, LLC
NORTH BRANCH, MN—2026-07-15 00:00:00
111603 - BROWN HAWK LLC DBA NORTHERN LIGHTS STEEL FAB
VAN BUREN, AR—2026-07-14 00:00:00
MILLAR PARTNERS, LLC
CLANTON, AL—2026-07-14 00:00:00
C & S CANOPY, INC.
More inspections in TX
RICHMOND, TX—2026-07-17 00:00:00
CORNELIUS NURSERIES, INC.
HOUSTON, TX—2026-07-17 00:00:00
HOLLOWAY HOUSTON, INC.
BONHAM, TX—2026-07-17 00:00:00
VOLUNTARY PURCHASING GROUPS, INC.
SNYDER, TX—2026-07-16 00:00:00
RNWBL
WICHITA FALLS, TX—2026-07-16 00:00:00
UNITED RENTALS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339887614.