OSHA Inspection: PRECISION ROLL GRINDERS, INC.

Issued

2016-07-22 00:00:00

Abate by

2016-09-10 00:00:00

Penalty

Initial $3825.00 · Current $2678.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    a) Precision Roll Grinders, Inc. - On or about June 15, 2016, employer did not conduct a periodic inspection of the energy control procedure at least annually.

Issued

2016-07-22 00:00:00

Abate by

2016-09-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:    a) Precision Roll Grinders, Inc. - On or about June 15, 2016, employees performing set up and maintenance on machines were not provided with adequate training to ensure that the purpose and function of the energy control program was understood.

Issued

2016-07-22 00:00:00

Abate by

2016-09-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tag out procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):    a) Precision Roll Grinders, Inc. - On or about June 15, 2016, the employers written procedures for lock out tag out was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6).

Issued

2016-07-22 00:00:00

Abate by

2016-08-06 00:00:00

Penalty

Initial $2066.00 · Current $1446.00 Reduced

General-duty citation text

29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting:    a) Precision Roll Grinders, Inc. - On or about June 15, 2016 employees permitted to use portable fire extinguishers were not provided with an educational program to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting.

Issued

2016-07-22 00:00:00

Abate by

2016-09-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date:    a) Precision Roll Grinders, Inc. - On or about June 15, 2016, did not certify that employees were trained in the knowledge and skills required for the safe application, use, and removal of energy controls.

Issued

2016-07-22 00:00:00

Abate by

2016-08-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.184(f)(1): Wire-rope slings did not  have permanently affixed and legible identification markings as prescribed by the manufacturer  that indicated the recommended safe working load for the type(s) of hitch(es) used, the angle upon which it is based, and the number of legs if more than one:  a) Precision Roll Grinders, Inc. - On or about June 15, 2016, wire rope slings used to lift a roll device with an overhead crane did not have permanently affixed and legible identification markings as prescribed by the manufacturer.