SEAGOVILLE, TX —
OSHA Inspection: ROCKWELL AMERICAN MANUFACTURING
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of ROCKWELL AMERICAN MANUFACTURING in 306 W SIMONDS RD, SEAGOVILLE, TX 75159 (NAICS 332613). OSHA activity number 341507960.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROCKWELL AMERICAN MANUFACTURING
- Site address
- 306 W SIMONDS RD
- City
- SEAGOVILLE
- State
- TX
- ZIP
- 75159
- Mailing
- 306 W SIMONDS RD, SEAGOVILLE, TX 75159
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332613
- Employees
- 90
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.332 B01
- Issued
- Nov 21, 2016
- Abate by
- Dec 2, 2016
- Penalty
- Initial $12,471 · Current $9,900 Reduced
General-duty citation text
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments: a) On or about May 26, 2016, when employees, who were working on an energized 480-volt electrical panel, were not trained in and familiar with safety-related work practices to protect them from arc flashes, electrical shocks and deep burns.
Recent events (2)
- — I (S) $9900
- — Z (S) $12471
1910.333 A01
- Issued
- Nov 21, 2016
- Abate by
- Dec 2, 2016
- Penalty
- Initial $12,471 · Current $0 Reduced
General-duty citation text
29 CFR 1910.333(a)(1): Live parts to which an employee could be exposed were not de-energized before the employee work on or near them: a) On or about May 26, 2016, where employees, who were working on an energized 480-volt electrical panel, were not protected from contacting live parts.
Recent events (2)
- — I (S) $0
- — Z (S) $12471
1910.333 A02
- Issued
- Nov 21, 2016
- Abate by
- Dec 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.333(a)(2): Where exposed live parts were not deenergized, other safety related work practices were not used to protect employees who could be exposed to the electrical hazards involved: a) On or about May 26, 2016, where exposed live parts were not de-energized, the employer did not use other safety related work practices to protect employees, who worked on or near energized electrical panel from arc flashes, electrical shocks and deep burns.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.335 A01 I
- Issued
- Nov 21, 2016
- Abate by
- Dec 2, 2016
- Penalty
- Initial $12,471 · Current $9,900 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed: a) On or about May 26, 2016, the employer did not provide electrical protective equipment to employees, who worked on energized electrical equipment, to protect them from arc flashes, electrical shocks and deep burns.
Recent events (2)
- — I (S) $9900
- — Z (S) $12471
1910.335 A02 I
- Issued
- Nov 21, 2016
- Abate by
- Dec 2, 2016
- Penalty
- Initial $12,471 · Current $9,900 Reduced
General-duty citation text
29 CFR 1910.335(a)(2)(i): When working near exposed energized conductors or circuit parts, each employee did not use insulated tools or handling equipment when the tools or handling equipment might have made contact with such conductors or parts: a) On or about May 26, 2016, when employees, who were working on an energized 480-volt electrical panel, did not use insulated tools to protect them from electrocution, electrical shocks and deep burns.
Recent events (2)
- — I (S) $9900
- — Z (S) $12471
More inspections at Rockwell American Manufacturing
View Rockwell American Manufacturing's full OSHA safety record →
More inspections in this industry (NAICS 332613)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341507960.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.