Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ROCKWELL AMERICAN MANUFACTURING

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of ROCKWELL AMERICAN MANUFACTURING in 306 W SIMONDS RD, SEAGOVILLE, TX 75159 (NAICS 332613). OSHA activity number 346348279.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rockwell American Manufacturing — free Get an email when a new federal OSHA severe-injury report for Rockwell American Manufacturing is published. One employer, no account, unsubscribe in one click.
Site address
306 W SIMONDS RD
City
SEAGOVILLE
State
TX
ZIP
75159
Mailing
306 W SIMONDS RD, SEAGOVILLE, TX 75159
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332613
Employees
103
Ownership type
A

7 citations on file for this inspection.

1910.22 A01

Serious Gravity 10 1 instance 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $15,625 · Current $10,547 Reduced
29 CFR  1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition:  On or about November 15, 2022, and at times prior thereto; in the Assembly area, where electrical extension cords on floor, running across passageways, exposing employees to trip and fall hazards.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $15625

1910.303 B02

Serious Gravity 5 2 instances 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $12,278 · Current $10,547 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:   On or about November 15, 2022, and at times prior thereto; in the Assembly area where:  a.  The metal electrical receptacle box was used on the end of a 14 AWG electrical extension cord to power the clip/U-Haul machine, exposing employees to electrocution, electrical shock and burns hazards.   b.  The electrical enclosure box was used on the end of a 14 AWG electrical extension cord to power the clip/U-Haul machine, exposing employees to electrocution, electrical shock and burns hazards.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $12278

1910.303 B07 I

Serious Gravity 5 1 instance 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $12,278 · Current $10,547 Reduced
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment:  On or about November 15, 2022 and at times prior thereto; in the Assembly area, where the Disconnect "Bult 12",  RIE2, 480-Volt to power the Racine pump Bull Dozer had opening that was not effectively closed, exposing employees to electrocution, electrical short and burns.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $12278

1910.303 E01 II

Serious Gravity 5 1 instance 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $12,278 · Current $10,547 Reduced
29 CFR 1910.303(e)(1)(ii): Electric equipment was used without markings giving voltage, current, wattage, or other ratings as necessary:    On or about November 15, 2022, and at times prior thereto; in the Assembly area, where the electrical panel was used to power the Disconnect to the Reamer KSB 50C and other equipment was not markings giving voltage, current, or other ratings as necessary, exposing employees to electrocution, electrical shock and burns hazards.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $12278

1910.305 G01 IV A

Serious Gravity 5 1 instance 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $12,278 · Current $10,547 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  On or about November 15, 2022, and at times prior thereto; in the Assembly area,  where electrical extension cords were used as a substitute for the fixed wiring of a structure, exposing employees to electrocution, electrical shock and burns hazards.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $12278

1910.334 A02 II

Serious Gravity 5 2 instances 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $12,278 · Current $10,547 Reduced
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service:  On or about November 15, 2022 and at times prior thereto, in the Assembly area:  a. Extension cord used to power the clip/U-Haul machine had damaged insulation, exposing employees to electrical shock and burns hazards.   b.  Extension cord used to power the Air King Fan had damaged insulation, exposing employees to electrical shock and burns hazards.
Recent events (2)
  • — I (S) $10547
  • — Z (S) $12278

1910.212 A03 II

Repeat Gravity 10 2 instances 70 exposed
Issued
May 12, 2023
Abate by
May 24, 2023
Penalty
Initial $156,250 · Current $100,002 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  On or about November 15, 2022, and at times prior thereto; in the Assembly area, where employees were operating Reamer/vertical drill machines without guards, exposing employees to caught-in and struck-by hazards:  a.	Reamer/vertical drill press, Knuth, model KSB 50C.  b.	Reamer/vertical drill press, Cincinnati Brickford Super Service.
Recent events (2)
  • — I (R) $100002
  • — Z (R) $156250

View Rockwell American Manufacturing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346348279.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.