OSHA Inspection: PRECISION CARGO, LLC

Issued

2019-01-09 00:00:00

Penalty

Initial $1885.00 · Current $1885.00

General-duty citation text

29 CFR 1926.451(e)(4)(i): A stairrail consisting of a toprail and a midrail were not provided on each side of each scaffold stairway:   A)  Center of shop area, on or about August 28, 2018, or prior to, the access stairway for two mobile scaffolds did not have a stair rail system on both sides of the stairway, exposing employees to a fall hazard.

Issued

2019-01-09 00:00:00

Penalty

Initial $2513.00 · Current $2513.00

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):   A)  Field area, on or about August 28, 2018, employees used a Caterpillar forklift to move material around the shop and field area that did not have an operable horn, exposing employees to a struck-by hazard.

Issued

2019-01-09 00:00:00

Penalty

Initial $2513.00 · Current $2513.00

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:   A) Wood cutting section, on or about August 28, 2018, or prior to, a Grizzly table saw # G0606X1table saw did not have a spreader bar, exposing the employee to a hazard of wood being thrown back toward the operator.

Issued

2019-01-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:   A) Wood cutting section, on or about August 28, 2018, a Grizzly table saw # G0606X1 did not have non kickback fingers, exposing the employees to a hazard of wood being thrown back toward the operator.