EASTABOGA, AL —
OSHA Inspection: SGS INDUSTRIAL SERVICES INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SGS INDUSTRIAL SERVICES INC. in 1 KRONOSPAN WAY, EASTABOGA, AL 36260 (NAICS 236220). OSHA activity number 343937025.
Where did this inspection happen?
- Establishment
- SGS INDUSTRIAL SERVICES INC.
- Site address
- 1 KRONOSPAN WAY
- City
- EASTABOGA
- State
- AL
- ZIP
- 36260
- Mailing
- 1790 CORPORATE DRIVE SUITE 315, NORCROSS, GA 30093
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 160
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.21 B02
- Issued
- Abate by
- Penalty
- Initial $8695.00 · Current $5698.00 Reduced
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury: (a) On or about April 01, 2019 - 1 Kronospan Way, Eastaboga, AL, employees were exposed to struck-by hazards when they were not instructed on the hazards associated with disassembly of a structural I-beam and columns.
Recent events (2)
- — I (S) $5697.75
- — Z (S) $8695
1926.602 C01 VI
- Issued
- Abate by
- Penalty
- Initial $5796.00 · Current $5796.00
General-duty citation text
29 CFR 1926.602(c)(1)(vi): Industrial truck(s) in use did not meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks: (a) On or about April 09, 2019 - 1 Kronospan Way, Eastaboga, AL, employees were exposed to struck-by hazards when employees drove industrial trucks with the forks elevated in violation of ANSI Standard B56.1-1969, Paragraph 604 TRAVELING, Subparagraph G3 which states the following: On all grades the load and load engaging means shall be tilted back if applicable, and raised only as far as necessary to clear the road surface.
Recent events (2)
- — I (O) $5796
- — Z (S) $5796
1926.602 D
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l): (a) On or about April 09, 2019 - 1 Kronospan Way, Eastaboga, AL, employees were exposed to struck-by hazards when an employee with no previous experience was certified to drive a forklift.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.754 A
- Issued
- Abate by
- Penalty
- Initial $11934.00 · Current $8500.00 Reduced
General-duty citation text
29 CFR 1926.754(a): Structural stability was not maintained at all times during the erection process: (a) On or about April 01, 2019 - 1 Kronospan Way, Eastaboga, AL, employees were exposed to struck-by hazards when a column fell during disassembly of a structural I-beam and columns.
Recent events (2)
- — I (S) $8500
- — Z (S) $11934
1904.29 B01
- Issued
- Abate by
- Penalty
- Initial $1450.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): A log of all recordable work-related injuries and illness (OSHA Form 300 or equivalent) was not completed in the detail required by the regulation: (a) On or about April 11, 2019 - 1 Kronospan Way, Eastaboga, AL, the employer had not completed the OSHA form in the detail required by the regulation for entries such as case #6 where no information was documented in columns G, H, I, J, K, L, M1, M2, M3, M4, M5, or M6 and case #7 where no information was documented in columns G, I, J, K, L, M1, M2, M3, M4, M5, M6 and the number of days away were incorrectly reported in Column H.
Recent events (2)
- — I (O) $1000
- — Z (O) $1450
1904.32 B03
- Issued
- Abate by
- Penalty
- Initial $1450.00 · Current $1000.00 Reduced
General-duty citation text
29 CFR 1904.32(b)(3): The 300A annual summary was not certifyed by a company executive to ensure that he or she has examined the OSHA 300 Log and that he or she reasonably believes, based on his or her knowledge of the process by which the information was recorded, that the annual summary is correct and complete: (a) On or about April 11, 2019 - 1 Kronospan Way, Eastaboga, AL, a company executive had not signed the OSHA 300A for 2018.
Recent events (2)
- — I (O) $1000
- — Z (O) $1450
More inspections at SGS INDUSTRIAL SERVICES INC.
EASTABOGA, AL—2019-03-27 00:00:00
SGS INDUSTRIAL SERVICES INC.
View SGS INDUSTRIAL SERVICES INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
IRVINE, CA—2026-07-13
SNEARY CONSTRUCTION, INC.
IRVINE, CA—2026-07-13
KUKBO DESIGN USA LLC
SIOUX FALLS, SD—2026-07-13
REM CONSTRUCTION SERVICES, LLC
INDIAN ROCKS BEACH, FL—2026-07-10
UNKNOWN CONTRACTOR
SIOUX FALLS, SD—2026-07-10
HENRY CARLSON COMPANY
More inspections in AL
CLANTON, AL—2026-07-13
UBIQUE TECHNOLOGIES, INC.
IRONDALE, AL—2026-07-13
FATHER NATURE LANDSCAPES OF BIRMINGHAM, INC.
GARDENDALE, AL—2026-07-09
ANDINO'S IRON WORKERS, LLC
CULLMAN, AL—2026-07-09
ALFREDO PICHARDO BLANCO
MOBILE, AL—2026-07-09
FLEXICREW TECHNICAL, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343937025.