OSHA Inspection: NOX US, LLC

Issued

2022-10-27 00:00:00

Abate by

2022-11-22 00:00:00

Penalty

Initial $10256.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.22(a)(2): The employer did not ensure that the  floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided.   a. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that the work floor, located in C-1 between Mix Mill 1 and the calender, was maintained in so far as possible a dry condition.  Oil residue on the diamond-plated flooring exposed employees to slip and fall hazards.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-15 00:00:00

Penalty

Initial $12307.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.23(e)(2)(i):The employer did not ensure that steps are uniformly spaced and arranged, with a rise of not more than 10 inches (25 cm) and a depth of not less than 7 inches (18 cm).   a. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, employees who utilized the mobile ladder stand to access the elevated work platforms located at the C-1 calender were exposed to trip and fall hazards at a maximum height of 58 inches in that the rise of steps exceeded ten inches and were not uniform.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $14357.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.28(b)(1)(i): Each employee on a walking/working surface having an unprotected side or edge which was four feet (1.2m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.                                                                                                            a. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, employees were exposed to fall hazards of approximately 72 inches when accessing the elevated platforms located adjacent to the C-1 calender to clean the calender rolls.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $14357.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that pinch points, created when the chuck is operated to secure the spindle on the C-1 Line winder, were guarded to protect employees' fingers/hands from crushing and/or amputation injury.  b. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that employees were protected from crushing injuries to their hands/fingers when the spindle/bar holders operate to move a finished roll from the C-1 Line winder to the lift table. Employees were exposed to pinch points, created between the holders and spindle and between the finished roll and table.   c. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that Conveyor #2, located between Mix Mills 1 and 2 in C-1, was guarded.  Employees were exposed to being caught in the conveyor's nip points created by the return idlers/rollers.  d. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that Conveyor #3, located between Mix Mills 1 and 2 in C-1, was guarded.  Employees were exposed to being caught in the conveyor's nip points created by the return idlers/rollers.  e. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure the three rotating mixing cones, installed on Mix Mill #1, were guarded to protect employees from pinch points and being caught-in the rotating parts.   f. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure the two rotating mixing cones, installed on Mix Mill #2, were guarded to protect employees from pinch points and being caught-in the rotating parts.   g. NOX US, LLC - Fostoria, Ohio: On or about May 17, 2022, the employer did not sure that the L-2 packing palletizer machine was guarded to protect employees from pinch points created between the raising/lowering palletizer roller table frame.    h. NOX US, LLC - Fostoria, Ohio: On or about May 3, 2022, employees working at the boxing machine, located after the C-cutter in the Off-line room, were exposed to pinch points created by the machine's pneumatic paddle.    i. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that the C-1 cooling rolls were guarded. The ingoing nip points created by the rotating rolls exposed employees to caught-in and crushing injuries.   j. NOX US, LLC - Fostoria, Ohio: On or about August 2, 2022, employees working at the Silla Machine (#2015-6-171) B-Cutter, located at the L-1 packing line, were exposed to the ingoing nip point created between the machine's exit conveyor and roller.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $14357.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  a. NOX US, LLC - Fostoria, Ohio: On or about May 17, 2022, the employer did not ensure the infeed side of the  Silla Machine (#2015-6-172) A-Cutter, used to cut vinyl floor slabs, was adequately guarded to protect employees from point of operation hazards created by the machine's cutter die.  b. NOX US, LLC - Fostoria, Ohio: On or about May 17, 2022, the employer did not ensure the infeed side of the Silla Machine (#2015-6-171) B-Cutter, used to cut vinyl floor slabs, was adequately guarded to protect employees from point of operation hazards created by the machine's cutter die.  c. NOX US, LLC - Fostoria, Ohio: On or about August 1, 2022, the employer did not ensure the infeed and outfeed sides of the  Silla Machine (#2015-6-170) C-Cutter, used to cut vinyl floor slabs, was adequately guarded to protect employees from point of operation hazards created by the machine's cutter die.  d. NOX US, LLC - Fostoria, Ohio: On or about May 17, 2022, the employer did not ensure the infeed and outfeed sides of the  Silla Machine  (#2018-8-254) D-Cutter, used to cut vinyl floor slabs, was adequately guarded to protect employees from point of operation hazards created by the machine's cutter die.  e. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that the cutter wheels, used to cut plastic on Mix Mill #1 in C-1, were guarded.  The nip point created between the cutter wheels and the mill exposed employees to point of operation hazards.  f. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that the cutter wheels, used to cut plastic on Mix Mill #2 in C-1, were guarded.  The nip point created between the cutter wheels and the mill exposed employees to point of operation hazards.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-07 00:00:00

Penalty

Initial $10256.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.219(i)(2): Bolt(s), nuts, or setscrews used in shaft coupling(s) extended beyond the flange of the coupling and were not covered with safety sleeve(s):  a. NOX US, LLC - Fostoria, Ohio: On or about May 4, 2022, the employer did not ensure that the couplings, located at the rotary joints on the end of the rolls on Mix Mill #2, were guarded to protect employees from being caught in the protruding bolts/rotating parts.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.

Issued

2022-10-27 00:00:00

Abate by

2022-11-07 00:00:00

Penalty

Initial $123062.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.132(a):Protective equipment was not used when necessary, whenever hazards capable of causing injury and impairment were encountered:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are provided with and wear personal protective equipment to protect against burn injuries to the arms. This violation was most recently observed on or about May 4, 2022, employees in the C-1 area who handle scrap plastic; and operate and clean the mix mills, calender, and take-off rolls, were exposed to severe thermal burns.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $5454.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation.   a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who service and maintain the Laminator Line C-1 winder machine are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was identified on April 28, 2022, after a serious injury incident from an employee being caught-in the rotating spindle of the winder machine and most recently on or about May 4, 2022, when employees performed setup on the winder machine and were not trained to isolate and render energy controls safe prior to performing the setup task.  b. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who service and maintain equipment located in C-1 such as, but not limited to, the take-off rolls, emboss rolls, cooling rolls, cutter, and winder, are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was most recently identified on or about May 4, 2022, when employees fed material through the equipment to setup the line and were not trained to isolate and/ or render energy sources safe prior to performing servicing tasks.  c. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who service and maintain the C-1 cooling rolls are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was most recently identified on or about May 9, 2022, when employees setup the cooling rolls by wrapping/unwrapping them with paper towels and were not trained to isolate and/or render energy sources safe prior to performing servicing tasks.  d. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who maintain the C-1 mix mills are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was most recently identified on May 4, 2022, when employees cleaned the mills and were not trained to isolate and/or render energy sources safe prior to performing the maintenance task.  e. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who service and maintain the Silla cutter presses such as, but not limited to, the Silla Machine A-Cutter (#2015-6-172), are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was most recently identified on or about May 9, 2022, when employees conducted a die change on the press and were not trained to isolate and/or render energy sources safe prior to the setup tasks.  f. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that employees who service and maintain the tape dispenser, located in L-2 Packing department, are trained in the skills required for the safe application, usage, and removal of energy controls. This violation was most recently identified on or about May 17, 2022, when employees replaced the tape and were not trained to isolate and/or render energy sources safe prior to the setup tasks.  NOX US, LLC was previously cited for a Repeat violation of this Occupational Safety and Health Standard 29 CFR 1910.147(c)(7)(i), which was contained in OSHA inspection number 1419279, citation number 3, item number 1 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.  NOX US, LLC was previously cited for a Willful violation of this Occupational Safety and Health Standard 29 CFR 1910.147(c)(7)(i), which was contained in OSHA inspection number 1248648, citation number 1, item number 2c and was affirmed as a final order on January 22, 2019, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are protected from nip-point and caught-in hazards when they apply tape to a cardboard core on a rotating spindle at the C-1 winder machine. On or about April 28, 2022, an employee was caught-in a rotating spindle resulting in serious injuries.  In addition, this was most recently observed on or about May 4, 2022, when employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy[(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  b. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are protected from rotating parts and pinch points created by moving components of the take-off rolls, emboss rolls, cooling rolls, cutter, and winder, at the C-1 line, in that the equipment is not locked out prior to cleaning the take-off rolls and threading the line for production. This violation was most recently observed on or about May 4, 2022, when the employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  c. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are protected from ingoing nip points created by the C-1 cooling rolls in that the equipment was not locked out prior to the setup activity of applying and removing paper towels on the rolls. This violation was most recently observed on or about May 9, 2022, when the employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  d. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are protected from crushing injuries in that the mix mills, located in C-1, were not locked out prior to cleaning the equipment's rolls. This violation was most recently observed on or about May 4, 2022, when the employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  e. NOX US, LLC - Fostoria, Ohio: The employer does not ensure employees are protected from crushing injuries from guide posts/cylinders on the side of the Silla Machine A-Cutter (#2015-6-172) while performing maintenance tasks, such as but not limited to, die changes. This violation was most recently observed on or about May 9, 2022, when the employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  f. NOX US, LLC - Fostoria, Ohio: The employer does not protect employees from amputation injury in that the tape dispenser, located in the L-2 Packing Department, is not locked out prior to performing a changeover of the tape roll. This violation was most recently observed on or about May 17, 2022, when the employer did not implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6), were not implemented to protect employees from machine servicing hazards.  NOX US, LLC was previously cited for a Repeat violation of this Occupational Safety and Health Standard 29 CFR 1910.147(d), which was contained in OSHA inspection number 1419279, citation number 2, item number 1b and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.  NOX US, LLC was previously cited for a Willful violation of this Occupational Safety and Health Standard 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 1419279, citation number 1, item number 2a and was affirmed as a final order on January 22, 2019, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the ingoing nip point on Waste Trim Conveyor #1, located in the C-1 area, is guarded to protect employees from being caught in the rotating conveyor rollers. This violation was most recently observed on May 4, 2022, while employees were hand-feeding plastic material into the powered rollers.   b. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the ingoing nip point on Waste Trim Conveyor #2, located in the C-1 area, is guarded to protect employees from being caught in the rotating conveyor rollers. This violation was most recently observed on May 4, 2022, while employees were hand-feeding plastic material into the powered rollers.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1419279, citation number 1, item number 2 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure the powered rollers, located in the L-1 Packing Department that feeds both the A and B Cutters, are guarded to protect employees from being caught in the rotating rollers. This was most recently identified on May 16, 2022, when packing employees were working at this roller conveyor.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1419279, citation number 1, item number 2 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure the powered rollers on the Box Machine roller conveyor, located at L-1 Packing A-Cutter Line, are guarded to protect employees from being caught in the rotating rollers. This was most recently observed on May 17, 2022, when employees were working at the Box Machine rollers.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1419279, citation number 1, item number 2 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure the powered rollers on the Box Machine roller conveyor, located at L-1 Packing B-Cutter Line, are guarded to protect employees from being caught in the rotating rollers. This was most recently observed on May 17, 2022, when employees were working at the Box Machine rollers.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1419279, citation number 1, item number 2 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $143577.00 · Current $132577.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a. NOX US, LLC - Fostoria, Ohio: The employer does not ensure the powered rollers on the Box Machine roller conveyor, located at L-2 Packing D-Cutter Line, are guarded to protect employees from being caught in the rotating rollers. This was most recently observed on May 17, 2022, when employees were working at the Box Machine roller.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1419279, citation number 1, item number 2 and was affirmed as a final order on January 17, 2022, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.

Issued

2022-10-27 00:00:00

Abate by

2022-11-03 00:00:00

Penalty

Initial $28714.00 · Current $30000.00

General-duty citation text

29 CFR  1910.216(b)(1)(iii):Safety tripwire cable or wire center cord was not located within 2 inches of a vertical plane tangent to the front and rear rolls. The cables were more than 72 inches above the level on which the operator stands.  a.  NOX US, LLC - Fostoria, Ohio:  The employer does not ensure that the tripwire cable, located on the inbound side of Mix Mill #1 in area C-1, is no more than 72 inches above the level where the operator stands located within 2 inches of a vertical plane tangent to the roll.  This violation was most recently observed on May 4, 2022, when the tripwire cable was located behind the front of the roll and at a height of up to approximately 79 inches on one end of the mill roll, and approximately 75.5 inches above the level where the operator stands, exposing the operator to caught-in hazards.  b. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the tripwire cable, located on the inbound/front side of Mix Mill #2 in area C-1, is no more than 72 inches above the level where the operator stands and located within 2 inches of a vertical plane tangent to the roll.  This violation was most recently observed on May 4, 2022, when the tripwire cable was located past the front of the roll and at a height approximately 84 inches on one end of the mill roll and up to approximately 88.5 inches where the operator stands, exposing the operator to caught-in hazards.  c. NOX US, LLC - Fostoria, Ohio: The employer does not ensure that the tripwire cable, located on the outbound/back side of Mix Mill #2 in area C-1, is no more than 72 inches above the level where the operator stands and located within 2 inches of a vertical plane tangent to the roll.  This violation was most recently observed on May 4, 2022, when tripwire cable was located past the front of the roll and at a height of approximately 73.5 inches on one end of the mill roll and up to approximately 78.5 inches on the other end, exposing the operator to caught-in hazards.  NOX US, LLC was previously cited for a Serious violation of this Occupational Safety and Health Standard 29 CFR 1910.216(b)(1)(iii), which was contained in OSHA inspection number 1244737, citation number 1, item number 2 and was affirmed as a final order on January 22, 2019, with respect to a workplace located at 931 South Springville Avenue, Fostoria, Ohio 44830.