1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: FLORISIN, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FLORISIN, LLC in 320 PUTNAM ST, EAU CLAIRE, WI 54703 (NAICS 339999). OSHA activity number 346320443.

Watch Florisin, LLC — free Get an email when a new federal OSHA severe-injury report for Florisin, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
FLORISIN, LLC
Site address
320 PUTNAM ST
City
EAU CLAIRE
State
WI
ZIP
54703
Mailing
320 PUTNAM ST, EAU CLAIRE, WI 54703
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339999
Employees
22
Ownership type
A

6 citations on file for this inspection.

1910.138 A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $10151.00 · Current $6091.00 Reduced
29 CFR  1910.138(a): The employer selected but did not require employees to use appropriate hand protection when employees hands were exposed to hazardous condition(s):  (a) Production area - northeast side of the facility; Employees were provided, but the wearing of was not enforced, proper hand protection when operating pneumatic shears to trim branches.
Recent events (2)
  • — I (S) $6090.6
  • — Z (S) $10151

1910.178 L01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $5801.00 · Current $3481.00 Reduced
29 CFR  1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck:  (a) Interior of facility and exterior storage area - west side; An employee, observed operating a powered industrial vehicle (PIV), was not provided training and/or evaluation before being tasked to operate a PIV inside and outside of the facility.
Recent events (2)
  • — I (S) $3480.6
  • — Z (S) $5801

1910.178 L04 III

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR  1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  (a) Interior and exterior of facility/storage area ; An employee who operates powered industrial vehicles (PIVs) on as much as a daily basis was last evaluated October 2017.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  (a) Interior and exterior of facility/storage area; An employee who operates powered industrial vehicles (PIVs) on as much as a daily basis was not included within training, evaluation, and certification documentation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $8702.00 · Current $5221.00 Reduced
29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) Production area - northeast side of facility; A pinch point was exposed where the feeding conveyor belt meets the bottom edge of the hopper on the southeast side of the "dirt machine."
Recent events (2)
  • — I (S) $5221.2
  • — Z (S) $8702

1910.219 C04 I

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4351.00 · Current $2611.00 Reduced
29 CFR  1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  (a) Production area - northeast side of facility; On the southwest side of the "dirt machine," a rotating shaft projected approximately 1.5 inches in length and was not smooth.
Recent events (2)
  • — I (S) $2610.6
  • — Z (S) $4351

View FLORISIN, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346320443.