Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

NORTH TONAWANDA, NY —

OSHA Inspection: WESTROCK CP LLC

Federal Agency inspection · Safety discipline

At a glance

On , OSHA opened a federal Agency safety inspection of WESTROCK CP LLC in 51 ROBINSON ST, NORTH TONAWANDA, NY 14120 (NAICS 322211). OSHA activity number 347221111.

Watch Westrock CP LLC — free Get an email when a new federal OSHA severe-injury report for Westrock CP LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
WESTROCK CP LLC
Site address
51 ROBINSON ST
City
NORTH TONAWANDA
State
NY
ZIP
14120
Mailing
51 ROBINSON ST, NORTH TONAWANDA, NY 14120

What kind of inspection was it?

Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
322211
Employees
129
Ownership type
A

Citations

2 citations on file for this inspection.

1910.145 C02 I

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $16131.00 · Current $16131.00

General-duty citation text

1910.145(c)(2)(i)  Caution signs shall be used only to warn against potential hazards or to caution against unsafe practices. 29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about 01/18/2024, in the production area; where energy control procedures for the non-routine task of removing the die-cut drum from the LANGSTON TITAN Rotary Die Cutter machine (machine number 4561/784) did not include the potential energy of the raised weight (the 4000 pound die-cut drum) in the types and magnitude of energy available on the machine.  ABATEMENT DOCUMENTATION REQUIRED
Recent events (3)
  • — F (S) $16131
  • — C (S) $16131
  • — Z (S) $16131

1910.147 D05 I

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices:  a) On or about 01/18/2024 on the LANGSTON TITAN Rotary Die Cutter (machine number 4561/784); where potential energy from a raised weight (the die cut drum) was not restrained before disconnecting the bolts which secured the die cut drum to the machine frame and prying the die cut drum out of the frame of the machine.  The die cut drum was attached to the "free wheeling" print down with rigging straps and a chain fall. When the die cut drum was rolled off the polyurethane anvil drum, it pulled the print down forward, creating a crushing action between the stationary die cut stand and the free wheeling print down. Employees were exposed to the crush point between the two parts of the machine.  ABATEMMENT DOCUMENTATION REQUIRED
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

More inspections at WESTROCK CP LLC

View WESTROCK CP LLC's full OSHA safety record →

More inspections in this industry (NAICS 322211)

More inspections in NY

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347221111.