OSHA Inspection: RESOLVE MARINE GROUP, INC.

Issued

2026-04-17 00:00:00

Abate by

2026-05-06 00:00:00

Penalty

Initial $5296.00 · Current $3707.00 Reduced

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Weld Shop: On or about February 24, 2026, employee(s) used a floor JET drill press to drill holes in the hatch covers. The JET drill press was not guarded to prevent employee(s) from having their hand(s), and/or finger(s) in the danger zone during operation. This condition exposed employee(s) to injury  OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.212(a)(1) in the ship building and ship repair industry.

Issued

2026-04-17 00:00:00

Abate by

2026-05-13 00:00:00

Penalty

Initial $5296.00 · Current $3707.00 Reduced

General-duty citation text

29 CFR  1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch.  Weld Shop:  On or about February 24, 2026, employees utilizing the  8'' DeWALT Bench Grinder (serial number: 201611YL322) were exposed to injury because the work rest was not adjusted to within one eighth of an inch.  OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.215(a)(4) in the ship building and ship repair industry.

Issued

2026-04-17 00:00:00

Abate by

2026-05-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch.  Weld Shop:  On or about February 24, 2026, employees utilizing the  8'' DeWALT Bench Grinder (serial number: 201611YL322) were exposed to injury because the adjustable tongue guard was not adjusted to one fourth of an inch or closer to the abrasive wheel.   OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.215(b)(9) in the ship building and ship repair industry.

Issued

2026-04-17 00:00:00

Abate by

2026-07-20 00:00:00

Penalty

Initial $6621.00 · Current $4635.00 Reduced

General-duty citation text

29 CFR  1915.75(d): Railings approximately 42 inches in height, with a mid rail, were not provided on the edges of wing walls of floating dry docks or on edges of graving docks.   Dry dock wing wall: On or about February 24, 2026, employee(s) performing shipyard maintenance and repair were exposed to serious injuries from a fall from the wingwall to the drydock below.

Issued

2026-04-17 00:00:00

Abate by

2026-05-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage.  Dive Shop: On or about February 24, 2026, the employer did not ensure at least 3 feet of clearance in front of the circuit breaker panel. This can lead to delayed access in the event of an emergency and expose employees to injury.   OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.303(g)(1)(ii) in the ship building and ship repair industry.

Issued

2026-04-17 00:00:00

Abate by

2026-05-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.  Construction trailer: On or about February 24, 2026, flexible cords and/or cables were used as a source of permanent power for a fluorescent strip light fixture that was used for workshop illumination, exposing employees to injury.   OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.305(g)(1)(iv)(a) in the ship building and ship repair industry.

Issued

2026-04-17 00:00:00

Abate by

2026-05-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1915.158(b)(4): 90 feet of line was not attached to each ring life buoy.)   Dry dock: On or about February 24, 2026, employee(s) performing ship maintenance and repair were exposed to injury in that each Coast Guard approved 30 inch life ring, did not have at least 90 feet of line attached.