105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

IRIS USA, Inc.

Overexertion involving outside sources, n.e.c. · Soreness, pain, hurt-nonspecified injury

Federal OSHA recorded a severe workplace injury at IRIS USA, Inc., 11111 80th Ave., PLEASANT PRAIRIE, WISCONSIN 53158 on — Soreness, pain, hurt-nonspecified injury, affecting the back, including spine, spinal cord, unspecified.

An employee was loading a truck. The dock plate that joins the ramp to the truck was frozen, so the employee jumped on it and exacerbated a prior back injury.

Hospitalized Back, including spine, spinal cord, unspecified Ramps, loading docks, dock plates

IRIS USA, Inc.

An employee was bending over to gather product when they were struck by a forklift as it began to move. The employee fell onto a pallet and suffered a contusion that required hospitalization.

Iris USA Inc.

An employee was moving an injection mold with an overhead crane. The mold began swinging and the employee tried to steady the mold by grabbing it with both hands. The swinging mold struck against the mold setting and pinched the employee's finger. The employee sustained an amputation of the left ring fingertip.

Iris USA, Inc

An employee's finger was caught by a material feeder's screw conveyor, causing a partial amputation.

View IRIS USA, Inc.'s full OSHA safety record →

INTEGRIS Health Edmond Hospital

An employee was in a patient's room. The employee was restraining the patient when the employee passed out from overexertion.

Republic Services

While servicing a container in an alley, an employee was rolling the container when it encountered an indentation in the alley and stopped abruptly. The employee reached out to grab the container and felt a burning sensation in his abdomen. The employee was hospitalized with a hernia and required surgery.

Havertys Furniture

An employee was working on a piece of equipment and used his legs and chest for support. The employee experienced chest pain and breathing issues and was hospitalized.

Tyler Pipe

An employee suffered a bicep tendon separation while grinding fittings. He was hospitalized.

L3 Security and Detection Systems

An employee was installing a 20-pound replacement motor assembly, banging on the part. The employee experienced altitude change and heavy lifting stress and was hospitalized with a collapsed right lung.

DimcoGray Corporation

An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.

Greatmats.com Corporation

An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.

Shumard Corporation

During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.

Toledo Molding & Die, Inc.

An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.

United Window & Door Manufacturing, Inc.

An employee was cutting material on a straight saw when the blade lacerated her right index finger. The employee was hospitalized.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.