Ko Fro Foods, Inc.

On December 19, 2023, an employee was setting up a copper wire drawing machine when his left ring finger was pinched between a copper wire and a machine part. The employee's finger was partially amputated.

An employee was examining a machine when a part moved up and amputated a fingertip on their left hand.

An employee was checking the gusset seal on a machine. He moved to the next cross sealer and the machine activated, causing an amputation to a left-hand finger. The employee was hospitalized.

An employee was evaluating a coiling machine to verify that the blade was present inside it. The machine's weld function was activated, and the machine crushed the employee's fingers, resulting in the amputation of the left middle and ring fingers.

An employee's right hand was caught in a wire drawing machine, resulting in amputation.

An employee was attempting to straighten a wooden pallet with a bar. The pallet was positioned on top of a frame conveyor system 1 foot off of the ground. While maneuvering the bar, the employee lost balance and fell backward onto the concrete floor, extending their right hand to catch themselves as they fell. The employee suffered two fractured bones in their wrist and one fractured bone in their right hand.

An employee was working near a conveyor when his left middle finger was caught in the conveyor. The employee required surgery and their finger was partially amputated.

An employee was filling a hopper that deposited blueberries in muffin trays. Two plastic plates inside the equipment closed, pinching and amputating the employee's left ring fingertip. The equipment was running and unguarded at the time.

An employee was returning a catch pan to a machine after dumping fruit out of it. The employee's hand was caught in a roller in the conveyor area of the fruit inspection line, and the employee's right arm was broken.

An employee had been using soap and a towel to clean a slicer. They were finishing the cleaning procedure when the power switch was activated. The slicer turned on while the employee's right ring finger was in the blade gap and the blade amputated their fingertip without bone loss.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.