Weyerhaeuser

During a maintenance day, two operators locked out the lathe to replace the trash gate cylinder. To complete the lockout, the lathe operator raised the trash gate to the pin position while another operator inserted a pin for the gate to rest on while the work is performed. When this event occurred, the lathe operator was in the cab, and the other operator was at the trash gate with the blocking pin. While inserting the pin, the gate rose from the run position to the pin position, pinching the injured employee's left middle finger and resulting in a fingertip amputation.

An employee was emptying a self-emptying trash dumpster. When the lever came down onto the track that guides the hopper into the dumping position, the employee sustained partial amputations to the right middle and index fingers.

An employee was climbing onto the outfeed roll case of a band mill. His left hand was on a 4-inch square tubing support beam as he stepped onto a bottom rail of the handrail. The handrail was attached to a set of steps, which tilted up. His left ring finger was smashed between the handrail and the square tubing. His fingertip was amputated.

An employee was operating a three-wheeled personal electric transport vehicle. While traveling up a concrete grade of approximately 30 degrees, the equipment failed. The employee then attempted to turn left, back down the incline, and the front wheel may have caught on a concrete barrier. The employee fell out of the vehicle, landed on the concrete ground and sustained a broken left femur.

As an employee was walking to his work station, he saw two boards misaligned on the green trimmer conveyor belt. When he reached to align the boards his left pinky finger was jammed between the conveyor belt wall and the boards. His left pinky fingertip was surgically amputated.

An employee was fixing ceiling tiles while working from a ladder when they fell to the floor and sustained a hip fracture.

An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.

An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.

An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.

An employee was coming down a portable ladder when they slipped and fell to the ground, resulting in a right forearm fracture.

An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.

An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.

An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.

An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.

While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.