Federal OSHA recorded a severe workplace injury
at VICOR CORPORATION, 400 FEDERAL STREET, ANDOVER, MASSACHUSETTS 01810
on — Fractures, affecting the hip(s).
Final narrative
At approximately 1:00 p.m. on 3/19/15, an employee was unsteady and fell while approaching the water cooler. The employee did not have any serious complaints that afternoon and left at her usual time. She was hospitalized for a broken hip.
An employee was pulling on a bale of corrugated cardboard boxes that were on a conveyor. The straps on the bale failed and the employee fell to the floor. The employee was hospitalized and required surgery for a fractured femur and/or hip.
On December 27, 2023, an employee was delivering mail to an apartment complex when their knee gave out and they fell to the ground. The employee was hospitalized with a left tibia fracture.
An employee was walking to the inventory cage when her ankle gave out and she fell to the floor. The employee sustained a femur fracture and was hospitalized.
An employee was dislodging a pallet that was stuck when boxes of product fell onto them, causing them to fall to the ground. The employee suffered a fractured femur.
An employee turned a corner while walking, tripped over the corner of a pallet on the floor, fell onto her arm, and broke it. She was hospitalized, requiring surgery.
An employee was moving a transformer from inside a shop. He was rolling it down a ramp when it tipped over onto his right foot and big toe, resulting in crush injuries and a laceration.
Employees were moving an electrical cabinet by using two wheeled equipment skates. One of the wheels of the skates became caught in a crack in the floor, causing the equipment to tip over and land on an employee's right foot. The employee's foot was fractured.
An employee was using an industrial magnet to lift and maneuver a weldment. While the frame was being set down on the welding table, the magnet disengaged prematurely; the frame fell and crushed the employee's left ring and middle fingers. The employee underwent medical amputations to the middle finger (at the first knuckle) and the ring finger (just past the second knuckle).
An employee was working on an order when they were struck by a forklift. This caused the employee to bump into a machine. The employee suffered a laceration to the right thigh, requiring hospitalization.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.