Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at SIKA CORPORATION, 100 Dan Road, CANTON, MASSACHUSETTS 02021
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was receiving trimmed PVC membrane pieces from a calendar when his finger came in contact with the blade amputating a fingertip. He was wearing cut-resistant gloves at the time of the incident.
An employee fell from the top of a fixed ladder, passing through the ladder's access opening and landing on the floor about 6-7 feet below. He suffered nine broken ribs (four on the left side and five on the right), as well as a punctured lung. He was hospitalized.
On April 8, 2025, an employee was unjamming a conveyor belt. It reactivated, and his right little finger was caught between the belt and a conveyor roller. He suffered a partial amputation of the fingertip.
An employee was moving a 30-to 40-gallon container of cement/mortar that was on wheels. The container tipped over onto the employee resulting in a back fracture.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was guiding a conveyor belt through a slitter when their hand was caught between the rollers and the table. When the employee pulled their hand out, the glove was left behind and their right middle fingertip was amputated.
A maintenance employee was working to place a 120-pound metal screen on top of a machine before installation, with the help of another employee. The injured employee's right ring finger was pinched between the screen and the machine and the fingertip was partially amputated.
On September 26, 2025, an employee was performing maintenance on an excavator when a bale of rubber fell from an adjacent rack and struck him. The employee sustained multiple fractures to his pelvic area.
An employee was cleaning a mixer door. The employee's left hand came into contact with the mixer blade, which was still slowly rotating. The employee suffered amputations to the left index and middle fingertips.
A temporary employee was working to remove a detached piece of rubber EPDM product that was hanging on the outside of a feed chute. As the employee grabbed the elongated material, the material reengaged inside the machine above the feed chute and pulled back, pinching their left index fingertip. The employee's fingertip was amputated.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.