Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at KyKenKee, Inc., 18719 Highway 11 N, VANCE, ALABAMA 35490
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was placing, compressing, and bolting together large 6x6 or 8x8 cut lumber. The employee's right hand was between two of the boards when the compression began, resulting in a severe crush and subsequent amputation to the second digit of the right pinky.
AmputationFinger(s), fingernail(s), n.e.c.Dimensional lumber: 2x4, 2x3, etc.
An employee was removing wood scraps from a concrete pad where he was to deliver sawdust. The wood scraps moved and he fell to the concrete pad. The employee sustained a fractured greater trochanter on their left femur.
An employee was stepping onto a short ladder to reach and connect an electrical line when he slipped. The lower portion of the right side of his ribcage struck the deck at the top of the ladder, resulting in a lacerated spleen. The employee required surgery.
An employee was using a pike to pull a log that had become misaligned on a deck when the log crushed the employee's left foot. The employee was hospitalized and their left little toe was surgically amputated.
An employee was separating board lumber by size at the flat deck. Their left ring finger came into contact with a 22-inch spinning saw blade and was amputated.
An employee was walking across a trimmer saw when they lost balance and fell. The employee extended their right hand to steady themself and their glove was caught by the drive belt of a pulley. Their hand was drawn into the pulley, resulting in amputations to the index, middle, and ring fingers.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 321912)
An employee was operating a panel saw when a piece of wood got stuck in the dust collection vent. He was clearing the jam when the pressure bar (that holds the material) came down on his right hand and crushed his fingers. He sustained partial amputations to the middle and ring fingertips.
On September 3, 2025, a lumber handler was cutting a board with a circular saw when the saw blade grabbed his glove and pulled his hand into the saw. The blade amputated his left index finger and lacerated his left ring finger.
An employee was adjusting self-dumping steel hopper to get it to latch onto the tines of a forklift. He rocked the hopper back and forth to dump. The hopper slid off the forklift and fell about 2-3 feet down onto his legs. The employee sustained a cut on his head, a bruise on his face, and both his ankles were fractured.
An employee was using his left arm to pull a piece of lumber from a chain, which was on his right side, to stack it on a lumber bunk positioned to his left. His left middle fingertip was crushed between the end of the lumber he was moving and the stationary lumber stack behind him, resulting in an amputation.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.