Nonroadway collision with object other than vehicle, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at TENNECO INC., 2000 BOLTEN ST., PARAGOULD, ARKANSAS 72450
on — Fractures, affecting the pelvis.
Final narrative
An employee struck a wall while parking a stand-up Toyota lift at the end of the shift. The employee's body hit a metal safety suggestion box, fracturing the employee's pelvis. At the time of the incident, the Toyota lift was missing a safety strap that drags on the floor to dissipate static electricity.
HospitalizedPelvisForklift, order picker, platform truck-powered
A maintenance employee was conducting repairs on the conveyor belt of an automatic palletizer. The employee's shirt fell in front of a sensor causing the equipment to energize. The employee's right middle finger was caught by chains within the conveyor belt motor resulting in a partial amputation.
An employee was performing an air check on an articulated dump truck when their finger was pinched in the clamping mechanism on the lift assist. The employee's right middle finger was amputated above the distal interphalangeal joint.
An employee was responding to a work order relating to a machine that was not cooling when the lid of the machine lowered onto the employee's thumb. They sustained a left thumb fracture and partial amputation that required hospitalization.
An employee had just replaced a broken sprocket and put in a new chain on a high-volume oil conveyor. The chain seized up. As he tried to free it, it took off and his left index finger was caught between the chain and the sprocket. The fingertip was amputated halfway up the nail.
An employee was driving a cart around the driving range to pick up golf balls. The vehicle struck an in-ground target causing the employee to strike his forehead on the windshield. The employee was hospitalized with fractures to their nose and cheekbone and lacerations to their head and hands.
An employee was operating a picker when it struck a stack of pallets. His body moved forward and he struck his face on the computer monitor in the vehicle, resulting in a concussion, laceration, and blurry vision.
An employee was driving a lift in reverse through an aisle while the lift was loaded with a headboard. The headboard caught merchandise in the aisle racks, causing it to shift and contact the employee's right leg. The employee suffered a broken leg.
An employee was driving a utility task vehicle (UTV) through the parking lot to the boat yard to meet a co-worker. The UTV and slid into a curb, causing it to flip on its side and land on the employee's leg, resulting in a broken leg.
On December 7, 2023, an employee was driving an order picker down an aisle when the mast of the vehicle struck a material pan that was hanging out of the rack. The pan fell and struck the employee, resulting in rib fractures and a spleen laceration.
More severe injuries in this industry (NAICS 332999)
An employee was pulling a steel parts handcart when its wheels caught on something and locked up. The cart fell backward. The cart handle struck the middle of the employee's right foot, breaking bones. The employee was hospitalized and required surgery.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
Two employees were running a CNC folder machine. The injured employee went to adjust the metal and the machine came down, crushing her forearms. Her left arm was fractured and both arms required stitches.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.