Georgia Pacific

On June 16, 2023, at 7:45 AM, an employee was operating a plate forming press and went to remove a piece of tape from inside the machine. The machine cycled and amputated their left ring fingertip.

On 7/17/2021, at approximately 6:30 p.m., a temporary employee was operating a battery powered pallet jack. While walking backward, he tripped over the forks of a parked forklift. The pallet jack continued moving, rolling up onto his right leg and fracturing the ankle and foot. The employee was hospitalized.

A maintenance employee was servicing a piston cylinder when the rod and rod head came loose from the framework holding it. He and another maintenance employee were lifting the cylinder with a hoist and the cylinder head fell approximately 20-24" and struck the employee's left ring finger, causing a fracture and a partial degloving. The employee was hospitalized and required surgery.

A coater operator was working at a board machine, adjusting the coater wipe at the coater rolls. The rolls caught the employee's right forearm, crushing it. He was hospitalized and his right hand was surgically amputated.

While stepping off a deck that was 2 inches above the floor, an employee suffered a twisted right ankle and fractures to the tibia and fibula.

An employee was fixing ceiling tiles while working from a ladder when they fell to the floor and sustained a hip fracture.

An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.

An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.

An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.

An employee was coming down a portable ladder when they slipped and fell to the ground, resulting in a right forearm fracture.

Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.

An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.

An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.

An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.

An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.