GILSTER-MARY LEE CORPORATION

An employee was driving a forklift in reverse to move materials when the forklift ran into a skid that was up on a rack. A finger on the employee's right hand was crushed between the forklift support bar and the skid, resulting in an amputation to the finger.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was cleaning a single-facer machine. The employee's fingertips were crushed between rollers in the machine. The employee was hospitalized, and the fingertips were medically amputated.

An employee was working on a pasta-making machine. The employee had removed and cleaned the screw. He was trying to line the screw up to slide it back into the barrel. When the screw was tapped with a mallet, his finger was caught between the screw and the wall of the barrel, causing an amputation to the finger.

On 6/18/2022, an employee had been driving a tow motor and putting finished products on the pallet wrapper machine when plastic wrap got jammed. The employee got off the tow motor and climbed onto the pallet wrapper to clear the jam. When he grabbed the wrap, his hand was pulled between the turntable and roller bed of the pallet wrapper. His hand was pinned/crushed causing broken bones in the right thumb and index finger. The machine was running at the time.

An employee was assisting with pipe on a drilling rig. The slips came down and landed on the employee's left foot fracturing four metatarsals.

Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.

Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.

An employee was greasing tongs on a work-over rig. The tongs lacerated one of the employee's fingers.

An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.

An employee got off a work platform to move empty pallets off the platform and onto the floor while a forklift driver was operating directly across from them and putting pallets up on an opposite platform. The forklift struck the employee as he was bringing down a pallet horizontally. The employee was pinned between the forklift and pallet, causing traumatic rhabdomyolysis to the employee's upper left thigh. The employee was hospitalized.

An employee was operating a motorized tugger when he fell from the tugger to the floor. He was hospitalized with a brain bleed that required surgery and an injury to the left hand.

An employee was applying a hoist hook to the I-bolt on a die plate when their right ring fingertip became pinched between the hook swivel and the bolt, resulting in an amputation/avulsion.

An employee was using a magnet in the waste bin while cleaning the metal. The employee walked the magnet to the other side of the line, then placed the magnet on a metal surface which caught their hands between the metal and the magnet, resulting in amputation of the middle fingertip.

An employee was operating a food packaging line that places a shrink sleeve band over the top of a plastic bottle. The rollers on the equipment jammed and the machine stopped. As the employee went to pull the shrink wrap down, the knife was triggered and contacted the employee's left thumb resulting in a partial amputation.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.