Parkdale Mills, Incorporated

A team was setting a vertical turbine pump for a chill water sump. To align the bolt holes, a forklift was used to bump the pump a small amount. The injured employee was checking if the holes were aligned when the pump was bumped again. Their right index finger was caught inside a bolt hole resulting in a fingertip amputation.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

Two employees were working on a scissor lift approximately 15-20 feet above the ground, positioned beside a larger production line with a moving trolley. As the trolly retracted, its external motor struck the basket of the lift, causing the lift to tip over. The injured employee and the lift fell to the ground and they suffered a laceration to the right knee that required hospitalization.

An employee was working in a storage area consolidating pallets of yarn when his shoelace got caught on the corner of a pallet. The employee lost his balance and fell to the floor, resulting in a right femur fracture in the hip area.

An employee was helping to unclog a packaging machine when their fingers got caught in the machine, resulting in partial amputations to the index, middle, and ring fingers on the right hand. The machine was energized at the time.

An employee was replacing the rollers on a machine. When the machine was jogged, the employee's left little finger was partially amputated.

On January 15, 2020, an employee was working at a welding machine and holding the tarp as it came out of the machine. As the machine began to cut the tarp, the employee attempted to cut the corner of the tarp with scissors. The machine's blade then contacted his finger, resulting in a partial amputation of the left fifth digit.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.