BROKEN BOW, NEBRASKA—
Becton Dickinson
Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Becton Dickinson, 150 S. 1st Ave , BROKEN BOW, NEBRASKA 68822 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was threading a new roll of bags into the midstream bagger machine. The jaws of the machine include a heat seal and cutters. The machine activated and the jaws caught his finger resulting in the amputation of the left index fingertip.
More severe injuries at Becton Dickinson
BROKEN BOW, NEBRASKA—
Becton Dickinson
An employee was inspecting trays as they came out of the descrambler machine. The employee went to reach for a damaged tray when his right index finger was caught between the tray and a sidepiece of the conveyor line, resulting in a fingertip amputation.
BROKEN BOW, NEBRASKA—
Becton Dickinson
Two employees were removing a screw from a high-speed injection molding machine. As they were removing the screw tip, pressurized molten plastic was released through an opening around the screw tip which resulted in both employees being burned by the molten plastic. They sustained burns to the forehead, right neck, face, right arm, and right hand. One employee was hospitalized.
MOBILE, ALABAMA—
Becton Dickinson
An employee was troubleshooting a packaging machine and adjusting the media when his left index finger was caught in the perforation blade, resulting in a traumatic amputation of the distal phalanx.
COLUMBUS, NEBRASKA—
BECTON DICKINSON
An employee was troubleshooting the conveyor and severed the distal tip of his right index finger when his right hand contacted the chain and gear.
BROKEN BOW, NEBRASKA—
Becton Dickinson
Maintenance employee was responding to a jammed machine on line #9. The employee reached into the machine to remove the jam. The machine cycled, feeding another tray that pinched his right ring fingertip between the tray and the frame of the machine, resulting in the tip being amputated.
View Becton Dickinson's full OSHA safety record →
Similar incidents · Same event type
DELAND, FLORIDA—
Pall Corporation
An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.
FAIRFIELD, OHIO—
Koch Foods of Cincinnati
An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.
BAY MINETTE, ALABAMA—
Stella-Jones Corporation
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
THEODORE, ALABAMA—
Mack Manufacturing, Inc.
An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.
THOMPSON, CONNECTICUT—
Nutmeg Container Corporation
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339112)
AURORA, ILLINOIS—
Amsino Medical INC.
On August 15, 2025, an employee was in a small room right before the exit. The door in the little room was locked. The employee climbed over a wall and hopped down to the other side, falling and resulting in a twisted right ankle. The employee was hospitalized.
HALTOM CITY, TEXAS—
Nurse Assist LLC
On August 14, 2025, an employee was assembling cables using a molding machine. When the machine was engaged, the mold came down and caught the employee's left hand, amputating three fingers.
SAN ANTONIO, TEXAS—
Footprint Medical
On August 8, 2025, an employee was operating a table-top injection molding machine. He refilled the barrel of the machine with resin and began a pack procedure in which the plunger of the machine moved into the barrel to compress plastic pellets into the mix. The plunger caught and amputated his fingertip.
LAKELAND, FLORIDA—
SteriPack USA (Limited) LLC
An employee was entering the manufacturing area when their finger became caught between a door and the door frame, resulting in an amputated finger.
MONTGOMERY, NEW YORK—
Medline Industries
An employee was working to move a pallet jack that had gotten stuck between the dock and the trailer. When the equipment was loosened, it struck the employee, throwing them backward onto the ground. The employee sustained fractured ribs and injury to their spleen and liver.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.