105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Hooper Corporation

Caught in running equipment or machinery during regular operation · Amputations

Federal OSHA recorded a severe workplace injury at Hooper Corporation, 2030 Pennsylvania Ave, MADISON, WISCONSIN 53704 on — Amputations, affecting the fingertip(s).

An employee utilizing the pace roll groover received a crushing injury to the right index finger that resulted in a partial amputation.

Amputation Fingertip(s) Bending, rolling, shaping machinery, unspecified

HOOPER CORPORATION

An employee was climbing a utility pole to conduct maintenance work and made contact with the electrical line. The employee was hospitalized for electric shock with burns to his right hand and wrist. Personal protective equipment was not worn at the time.

Hooper Corporation

An employee was trimming tree branches at a client property. The employee was climbing the tree when they fell 10 feet to the ground, suffering fractured vertebrae.

Hooper Corporation

An employee was loading HVAC components onto the back of a flatbed truck using a forklift. The employee got onto the flatbed to adjust/position the pallet to make room for a second pallet. The materials on top of the pallet shifted and moved toward the employee. The employee then jumped off the flatbed to the pavement four feet below, resulting in a fractured left tibia.

HOOPER CORPORATION

On August 12, 2024, an employee was traveling in a boom lift through a substation when it contacted an angle iron brace. The employee's body was caught between the brace and the boom lift controls and they sustained a fractured jaw.

Hooper Corporation

An employee was working on a 120-volt secondary line from the bucket of a line truck when they contacted the line and sustained an irregular heart rhythm.

View Hooper Corporation's full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Air-flo/Erwood Heating & Air Conditioning

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.

Corrigan Brothers Inc

An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.

Village Plumbing, Air & Electric

While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.

Goodrich Fire & Life Safety

An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.

Sprinklermatic Fire Protection Systems, Inc.

An employee was trimming out sprinklers on the exterior of a building when he fell off an extension ladder. He landed on the ground and sustained fractures to his nose and arm.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.