Collision with stationary object, nonroadway · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at HOOPER CORPORATION, 38?59'49.1"N 102?30'02.2"W, CHEYENNE WELLS, COLORADO 80810
on — Fractures , affecting the Jaw, chin.
Final narrative
On August 12, 2024, an employee was traveling in a boom lift through a substation when it contacted an angle iron brace. The employee's body was caught between the brace and the boom lift controls and they sustained a fractured jaw.
An employee was climbing a utility pole to conduct maintenance work and made contact with the electrical line. The employee was hospitalized for electric shock with burns to his right hand and wrist. Personal protective equipment was not worn at the time.
An employee was trimming tree branches at a client property. The employee was climbing the tree when they fell 10 feet to the ground, suffering fractured vertebrae.
An employee was loading HVAC components onto the back of a flatbed truck using a forklift. The employee got onto the flatbed to adjust/position the pallet to make room for a second pallet. The materials on top of the pallet shifted and moved toward the employee. The employee then jumped off the flatbed to the pavement four feet below, resulting in a fractured left tibia.
An employee was working on a 120-volt secondary line from the bucket of a line truck when they contacted the line and sustained an irregular heart rhythm.
An employee was performing a maintenance task on an electrical transmission line at a remote location. They contacted an energized transmission line. A flash occurred and the employee sustained electrical burns to the body.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.
More severe injuries in this industry (NAICS 237130)
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.