Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Graphic Packaging International, Inc., 160 Washington Street, MENASHA, WISCONSIN 54952
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was working by a sheeter roll and was using a wedge so it wouldn't move. When he placed the wedge, the roll moved and it pinched his fingers. The roll weighs 2,000 lbs. The hand specialist had to amputate the right middle fingertip.
An employee was working with a pallet bagger, trimming excess corrugate off a tray. The load was raised on a lift table. The scrap being trimmed activated the lift table's photo eye, causing the table to lower. Its frame pinched the steel toe of the employee's left boot between a bracket and the concrete. The employee suffered fractures in the left foot and was hospitalized.
An employee was completing a quality check at the coating section of the paper machine. As the employee was clearing a coating buildup from the applicator roll, the employee's left hand was caught in a nip point between the applicator roll and coater roll and crushed.
While an employee was repairing a water condensate motor and pump, the grating covering an adjacent u-drain dislodged. This caused the employee's right leg to drop into hot water condensate resulting in a thermal burn to the lower right leg.
An employee was pushing a loaded pallet to the end of a conveyor at a press. The employee noticed a plastic pad lying in front of the pallet and was removing it when the pallet, still rolling, pinched the employee's right ring finger against the metal conveyor end stop amputating it.
On 10/10/2018, around 8:30 a.m., an employee was attempting to replace a motor on a press machine when the employee was pinned between the motor and the machine frame, suffering contusions that required hospitalization.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 322299)
An employee was clearing a jam and cleaning up loose paper. Her left hand was caught by a rotating cylinder and pulled into the score section in the tower of an envelope machine. Her hand was crushed and multiple fingers were amputated.
An employee's hand was inside a machine when residual energy caused a heavy metal part to fall on their hand. The employee sustained a left index finger amputation.
An employee was troubleshooting a broken belt on a beveling machine when his left index finger was caught in a partially guarded chain and sprocket mechanism, resulting in a partial fingertip amputation just below the fingernail.
On March 28, 2025, an employee was changing a printer blanket and got caught by the printer's rollers resulting in amputation of their left index finger.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.